MOTORCYCLE

Charge your portable devices on the go with a 12-volt DC Power Outlet

• Installs directly into one of two available knock-out ports on the Versys 1000 dash panel
• Versys 650 MY 2022 Require Relay Kit (99994-1677)
• Versys 650 MY 2021 - 2015 require relay kit (99994-0556) sold separately
• KLR650 requires relay kit (99994-1502) sold separately
• Dealer installation recommended

Purchase as a required component to mount Gear Position Indicator (99994-0540), DC Power Outlet (99994-0541), LED Light Bar (99994-0511), or other electrical accessories

• Only one Relay Kit required per Vulcan S motorcycle

Invite a friend along for the ride with added passenger comfort and accommodations

• Integrated brackets are constructed from black powder-coated steel to match the overall look of the bike
• Peg-style Passenger Footpeg Set is rubber-coated for durability and grip while providing a minimalist, clean look when riding solo
• Powder-coated steel
• All necessary brackets and hardware included
• Required component for Passenger Seat (99994-0558) or ERGO-FIT extended reach passenger Seat (K53001-252C), sold separately

Protect paint finish from scratches and wear

• Made with durable textured non-slip vinyl
• Sold as a set of 2

Made to tailor fit and compliment the Versys-X 300 motorcycle, this seat enhances riding comfort for taller riders

• The ERGO-FIT extended reach seat is 25mm (1 inch) taller than stock and comes fully assembled
• PVC foam with vinyl cover

Purchase as a required component to mount DC Power Outlet (99994-0997), LED Auxiliary Light Set (99994-0996), or other electrical accessories

• Only one Relay Kit required per Versys-X 300 motorcycle

Purchase as a required component to mount DC Power Outlet (99994-1113) or other electrical accessories, sold separately

• Only one Relay Kit required
• DC Power Outlet (99994-1113)

Protect paint finish from scratches and wear

• Made with durable textured non-slip vinyl
• Standard equipment on Ninja H2 SX SE

Prevent tip-over damage to your front axle, axle nut, fork bottoms and brake calipers

• Manufactured from high density ABS plastic
• Functional yet stylish and compact design
• Includes required brackets, hardware and installation instructions
• Note: Front Axle Sliders help protect your motorcycle but will not prevent all types of damage

The ERGO-FIT reduced reach handlebar decreases reach by 25mm (1 inch) to suit most riders 5’6” and under

• Made to tailor fit and complement the Vulcan S, this accessory handlebar combined with the standard adjustable clutch and brake levers allows riders to find a comfortable reach

Charge portable devices on the go with a 12-volt DC power outlet that mounts easily next to your bike’s gauges

• Minimal installation required
• All required brackets and hardware included
• Requires Relay Kit (99994-0510), sold separately
• 21mm (4/5”) diameter socket

Charge your portable devices on the go with a 12-volt DC power outlet that mounts easily next to your bike’s gauges

Give your passenger additional comfort with this classic style Passenger Grab Bar

• Made from durable chrome-plated steel
• Includes all required hardware
• Not compatible with the Side Grip Set (99994-1014)

Large storage bin fits under passenger side of seat. Lift seat bottom for access.

• Approximately 13 litres volume.

Convenient storage for touring and daily use

• Saddlebag Set and Soft Top Case feature a unique rubberized vinyl finish that is water-resistant
• Tank Bag manufactured from ballistic nylon
• Order Soft Top Case, Saddlebags, and Tank Bag separately
• Saddlebag Set dimensions: 406mm (16”) L x 279mm (11”) W x 178mm (7”) H

Conveniently lock your helmet when you’re off the bike.

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for operation
• Steel construction
• Dealer installation required

Mount this luggage rack to your rear fender for extra cargo capacity

• Developed by Kawasaki to integrate with the clean, modern lines of your Vulcan S motorcycle
• Powder coated steel
• All required brackets and hardware included
• Not compatible with accessory passenger seats
• 356mm (14”) L x 190mm (71/2”) W
• Maximum Load 2.2kg.

Sporty scratch-resistant smoked meter cover

• 100mm (4 inches) taller and 90mm (3.5 inches) wider than stock meter cover

Charge your portable devices on the go with this 12-volt DC Power Outlet

• Installs into dash panel
• Dealer installation recommended
• Requires Relay Kit (99994-1004), sold separately

Made from durable chrome-plated steel

• Includes all required hardware
• Helps maneuver the Z900 RS motorcycle when not in use
• Not intended for passenger use while riding
• Not compatible with the Passenger Grab Bar (99994-1013)

Made to tailor fit and complement the Ninja 400 and Z400 motorcycles, this seat enhances riding comfort for taller riders

• The ERGO-FIT extended reach seat is 25mm taller than stock and comes fully assembled
• Utilizes factory seat base and components for a factory fit
• PVC foam with vinyl cover

Charge your portable devices on the go with this 12-volt DC Power Outlet

• Installs directly into knock-out port on the dash panel
• Standard equipment on Ninja H2 SX SE
• Dealer installation recommended

Taller Meter Cover for the Z400 raises airflow from the front cowl while maintaining an overall aggressive appearance

• Manufactured from slightly translucent black high density ABS plastic
• 51mm (2”) wider and 102mm (4”) higher than stock meter cover
• Includes required brackets, hardware, and installation instructions

The ERGO-FIT reduced reach seat reduces the seat height by 15mm (5/8")

• Made to fit and complement the Ninja H2 SX motorcycle
• PVC foam with vinyl cover
• Includes all necessary hardware

Prevent tip-over damage to your front axle, axle nut, fork bottoms and brake calipers

• Manufactured from high density ABS plastic
• Functional yet stylish and compact design
• Includes required brackets, hardware and installation instructions
• Note: Front Axle Sliders help protect your motorcycle but will not prevent all types of damage

Help protect your engine shrouds from tip-over damage

• High-density black ABS plastic Frame Sliders are mounted with factory-designed metal brackets
• Includes required brackets, hardware and installation instructions
• Note: Frame Sliders help protect your motorcycle but will not prevent all types of damage

Secure your personal items in 21 litres of lockable storage

• Rugged styling to complement the aggressive design of your Kawasaki vehicle
• Utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Individual side case dimensions: 467mm (18.4”) L x 238mm (9.4”) W x 351mm (13.8”) H with 21 litre storage capacity
• 21 Litre Side Cases clip to sturdy support brackets
• Requires Fitting Kit (99994-1492), Side Panel Set (99994-1491-GU), and One Key System (99994-1566)
• Silver resin Side Panel Set provides colour accents and contributes to functional adventure-style looks

• 21 Liter Side Cases, Side Panel Set (99994-1491-GU)
• 21 Liter Side Cases, Fitting Kit (99994-1492)
• 21 Liter Side Cases, One Key System (99994-1566)

Help protect your tank’s paint finish from scratches and ordinary wear and tear

• Made with textured non-slip vinyl

Made from durable black steel

• Includes all required hardware
• Not intended for passenger use while riding
• Not compatible with the Passenger Grab Bar (99994-1545)

ERGO-FIT Reduced Reach Seat reduces the seat height by 25mm (1") and has a narrowed front

• The seat vinyl is the same high-elasticity-type material used on the standard seat
• Made to fit and complement the W800 motorcycle
• Includes all necessary mounting hardware

ERGO-FIT reduced reach seat reduces the seat height by 20mm (4/5") and has a narrowed front

• The seat area has deeper cushioning for added long distance comfort
• Made to fit and complement the Versys 1000 SE
• Includes all necessary hardware

ERGO-FIT reduced reach seat reduces the seat height by 25mm (1") and has a narrowed front

• The seat vinyl is the same cold-resistant, high-elasticity-type material used on the standard seats
• Made to fit and complement the Z900 RS motorcycle
• Includes all necessary hardware

Lock your helmet securely and conveniently when you’re off the road

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Steel construction
• All required brackets and hardware included
• Authorized Kawasaki dealer installation required

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip

• Adjust to low, medium, or high settings with the touch of a button
• Indicator light on the left grip improves setting visibility
• Grip Heater Set with all required wiring, brackets, and hardware
• Dealer installation recommended

Black painted steel construction luggage rack mounts to the rear frame

• Designed by Kawasaki to enhance your W800 motorcycle styling while providing extra space for whatever you take with you on the road
• All required brackets and hardware included
• Not compatible with Passenger Grab Bar (99994-1223)

Chrome plated steel construction luggage rack mounts to the rear frame

• Designed by Kawasaki to enhance your W800 motorcycle styling while providing extra space for whatever you take with you on the road
• All required brackets and hardware included
• Not compatible with Passenger Grab Bar (99994-1223)

Scratch-resistant clear windscreen, designed to provide additional rider comfort.

• Kawasaki branded product, produced and developed by Kawasaki and fully road legal.

Chrome rectangular steel bar construction

• Measures: 191mm (7½”) L x 178mm (7”) W
• Cargo capacity 2.2 kg (5 lbs.)
• Passenger Backrest (K99994-0066A) required for 900 Classic models, sold separately

Designed to match your Vulcan 900 Custom motorcycle chevron styling

• Padded mini-backrest is 203mm (8) H from seat surface
• Mounts easily with supplied hardware
• Designed to mount the Luggage Rack (K53020-378 or K53020-378B), sold separately

Designed to match your Vulcan® 900 Custom motorcycle chevron styling

• Padded mini-backrest is 203mm (8”) H from seat surface
• Mounts easily with supplied hardware
• Designed to mount the Luggage Rack (K53020-378 or K53020-378B), sold separately

Chrome-plated tubular steel design to match your VN900 Custom chevron styling

• Rack measures 9" wide x 8" long
• Mounts easily with supplied hardware
• Cargo weight limit 2.2kg 
• K53020-377 backrest required (sold separately)

Designed to match your Vulcan 900 Custom motorcycle chevron styling

• Rack measures 229mm (9”) W x 203mm (8”) L
• Mounts easily with supplied hardware
• Cargo weight limit 2.2kg (5 lbs.)
• Backrest (K53020-377B) required, sold separately

Clear touring screen made with optically correct polycarbonate plastic for improved visibility and Quantum hard coating to protect against scratching

• KQR mounting system allows for easy installation or removal once installed
• 435 mm (17 1/4 inch) tall
• Note: Requires KQR Mounting Bracket Kit (99994-0526B) and KQR Fork Bracket Kit (99994-0546) sold separately
• Note: 2016 Vulcan S Cafe Edition does not require 99994-0546 (already installed on unit)

Chrome steel construction Luggage Rack mounts to your Passenger Backrest

• Designed by Kawasaki to enhance your Vulcan S styling while providing extra space for whatever you take with you on the road
• 20.3cm long X 22.8cm wide (8” long x 9” wide)
• NOTE: Requires KQR Passenger Backrest (99994-0518) and KQR Bracket Kit (99994-0523) (sold separately)

Made to tailor fit and complement the Ninja 650 motorcycle, this seat enhances riding comfort for taller riders

• The ERGO-FIT extended reach seat is 25mm (1 inch) taller than stock and comes fully assembled
• Utilizes factory seat base and components for a factory fit
• PVC foam with vinyl cover
• Includes all parts needed to replace the stock seat
• Stylish carbon fiber pattern trim and embroidered Kawasaki logo

ERGO-FIT reduced reach seat reduces the seat height 35mm (1 3/8") and has a narrowed front, facilitating the reach to the ground for increased confidence and comfort

• The seat leather is the same cold-resistant, high-elasticity-type material used on the standard seats
• Made to fit and complement the KLR650 motorcycle
• Includes all necessary hardware
• Utilizes factory seat base
• Fits 2022~ KLR650 & KLR650 Adventure

Reduced reach seat reduces the seat height by 20mm (4/5") and has a narrowed front

• The seat area has deeper cushioning for added long distance comfort
• Made to fit and complement the Versys 1000 motorcycle
• Includes all necessary hardware

Heated hand grips with adjustable heat level

• LED display to show selected heat level
• Includes automatic battery saver function

Required component to move footpegs to extended reach position Installation Instructions & Info

Required component to move footpegs to reduced reach position

Installation Instructions & Info

Required component to mount Premium Saddlebag Set (99994-0522) or Soft Saddlebag Set (K57003-121) (sold separately)

• Durable powder-coated steel construction
• Sold as a set of 2

Help protect your engine shrouds from tip-over damage

• High density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory designed metal brackets
• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use the ignition key for unlocking

• Steel construction
• All required brackets and hardware included
• Dealer installation required

The ERGO-FIT reduced reach handlebar increases the rise by 20mm (3/4”) over the stock handlebar

ERGO-FIT reduced reach seat reduces the seat height 15mm (5/8 inch)

• Made to tailor fit and compliment the Ninja H2 SX motorcycles
• Includes all necessary hardware

• Protect paint finish from scratches and wear
• Made with durable textured non-slip vinyl

Made to tailor fit and complement the Z H2 motorcycle, this seat enhances riding comfort for taller riders

• The ERGO-FIT extended reach seat is 10mm (2/5") taller than stock and comes fully assembled
• Utilizes factory seat base and components for a factory fit
• PVC foam with vinyl cover
• Includes all parts needed to replace the stock seat

Help protect your engine shrouds from tip-over damage

• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Limited Quantities Help protect your tank’s paint finish from scratches and ordinary wear and tear

• Replaces the original silver trim

This passenger seat matches the Vulcan S stock seat for a uniform look

• Polyurethane foam with vinyl cover
• Requires Passenger Footpegs (99994-0570) (sold separately)
• Use with ERGO-FIT Mid Reach (Original seat) or Reduced Reach Seat (99994-0876 / 99994-1559) (sold separately)
• Not compatible with ERGO-FIT extended reach seat (K53001-251C) (sold separately)

The interchangeable ERGO-FIT reduced reach seat moves riders forward 2 inches to suit most riders 5’6” and under

• Made to tailor fit and complement the Vulcan S, this seat will help riders find the right reach to the ground while keeping things comfortable
• Note: Not compatible with ERGO-FIT extended reach passenger seat (K53001-252C)

Stock handlebar end caps finished in chrome

Clear touring screen made with optically correct polycarbonate plastic for improved visibility and Quantum hard coating helps to protect against scratching

• 80 mm (3") taller and 40 mm (1.5") wider than stock windshield

Keep your hands warm on the road with an ergonomically designed heat system to minimize added bulk to the grip

• Adjustable between low, medium and high settings with the touch of a button
• Indicator light makes viewing your settings easy at night
• Grip set with all required, wiring, brackets and hardware
• Dealer installation recommended

Help keep your hands warm on the road with an ergonomically designed grip heater system to minimize added bulk to the grip

• Adjusts between low, medium, and high settings with the touch of a button
• Indicator light makes viewing your settings easy day or night
• Grip set with all required wiring, brackets, and hardware
• Dealer installation recommended
• Requires Relay Kit (99994-1502), sold separately

• Relay Kit (99994-1502)

Made to tailor fit and complement the Z H2 motorcycle, this seat enhances riding comfort for taller riders

• The ERGO-FIT extended reach seat is 20mm (4/5") taller than stock and comes fully assembled
• Utilizes factory seat base and components for a factory fit
• PVC foam with vinyl cover
• Includes all parts needed to replace the stock seat

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip

• Adjust to low, medium, or high settings with the touch of a button
• Indicator light on the left grip improves setting visibility
• Grip Heater Set with all required wiring, brackets and hardware
• Dealer installation recommended
• Note: Requires Relay Kit (99994-1677), sold separately

Give your passenger additional comfort with this classic style passenger grab bar

• Made from durable black painted steel
• Includes all required mounting hardware
• Not compatible with Luggage Rack (99994-1224)

Keep your hands warm on the road with an ergonomically designed heat system to minimize added bulk to the grip

• Adjustable between low, medium, and high settings with the touch of a button
• Indicator light makes viewing your settings easy at night
• Grip set with all required, wiring, brackets, and hardware
• Dealer installation recommended

Made to tailor fit and complement the Z900 motorcycle, this seat enhances riding comfort for smaller riders

• The ERGO-FIT reduced reach seat reduces the seat height by 20mm (4/5 inch) and has a narrowed front
• Utilizes factory seat base and components for a factory fit
• PVC foam with vinyl cover
• Includes all parts needed to replace the stock seat

Complete heated grip kit replaced stock grips and throttle

• Note: Requires Relay Kit (99994-0195) 2010-2014 or (99994-0556) 2015-2018, sold separately

Keep your hands warm on the road with an ergonomically designed heat system to minimise added bulk to the grip

• Adjusts between low, medium and high settings with the touch of a button
• Indicator light improves setting visibility
• Rubber grips with metal brackets
• Grip set with all required wiring, brackets and hardware
• Dealer installation recommended

Give passengers room to stretch out

• Seat back is 25mm (1) thicker and 50mm (2) wider than the optional Passenger Seat
• Firm foam with a gel insert provides long-distance support and comfort, while the carbon fiber trim matches the ERGO-FIT extended reach seat for a sleek overall look
• PVC foam with vinyl cover
• Not compatible ERGO-FIT reduced reach or mid-reach seats
• Requires Passenger Footpegs (99994-0570), sold separately

Quick detachable passenger backrest installs and removes in seconds

• Keyed lock provides security
• Requires KQR Mount Kit (K53020-405)
• Optional KQR Luggage Rack (K53020-408), sold separately

Convenient storage for touring and daily use

• Saddlebags and Soft Top Case feature a unique rubberized vinyl finish that is water-resistant
• Tank Bag manufactured from ballistic nylon
• Order Soft Top Case, Saddlebags, and Tank Bag separately

Rugged, water-resistant nylon construction with reinforced foam body and lid to hold shape even when empty

• Compartment at front of lid with view window for toll transponder, coins, etc.
• Zippered pocket at front of bag to hold small items
• Dual outlet ports
• Reflective piping for night visibility
• Convenient carrying handle
• Expandable feature adds 76mm (3) of vertical storage capacity (20 litres of maximum capacity)
• Exclusive Kawasaki zipper pulls and embossed logo
• Secures firmly to tank using a three-way custom mounting system consisting of a clip, a hook-and-loop strip and a lightweight magnetic skirt with a non-scratch rubberized coating to protect paint finish
• Do not use on satin, semi-gloss or flat finish fuel tank surfaces
• Tank Bag dimensions 432mm (17) L X 279mm (11) W X 132mm (6)/229mm (9) H

Rugged, water-resistant nylon construction with reinforced foam body and lid to hold shape even when empty

• Compartment at front of lid with view window for toll transponder, coins, etc.
• Replacement Tank Bag Tray Cover (K57003-117) available separately
• Zippered pocket at front of bag to hold small items
• Dual outlet ports
• Reflective piping for night visibility
• Convenient carrying handle
• Expandable feature adds 76mm (3”) of vertical storage capacity (20 litres of maximum capacity)
• Exclusive Kawasaki zipper pulls and embossed logo
• Attaches to tank using a three-way custom mounting system consisting of a clip, a hook-and-loop strip and a lightweight magnetic skirt with a non-scratch rubberized coating to protect paint finish
• Do not use on satin, semi-gloss or flat finish fuel tank surfaces
• Tank Bag dimensions 432mm (17”) L  X 279mm (11”) W X 132mm (6”)/229mm (9”) H

Rugged, water-resistant nylon construction with reinforced foam body and lid to holdshape even when empty.

• Faux carbon inserts, custom zipper pulls and integrated Kawasaki patch on lid add style.
• Clear window tray at front of lid for toll transponder, coins, etc.
• 18 litre cargo capacity with expandable feature to add 3" of vertical storage capacity (maximum capacity 21 litres)
• Reflective piping for additional night time visibility
• Conveniently placed handle allows for easy transport when off bike
• Internal mesh pocket keeps small items separate
• Power/drink tube port at top of bag for direct access to electronic devices, hydration systems, etc.
• Mounts to fuel tank using custom dual straps and lightweight magnetic skirt with non-scratch rubberized coating to help protect paint finish
• Rain cover included17" long x 11" wide x 6"/9" high

The Soft Top Case features rugged, water-resistant nylon construction with reinforced foam body and lid to hold shape even when empty

• Faux carbon inserts, custom zipper pulls and integrated Kawasaki patch on lid add style
• 18 litre cargo capacity with expandable feature to add 76mm (3”) of vertical storage capacity (maximum capacity 21 liters)
• Reflective piping
• Conveniently placed handle allows for easy transport when off the bike
• Mounts to rear fender using custom quad side straps and steel center bracket with non-scratch rubberized coating to help protect paint finish
• Rain cover included
• 457mm (18”) L x 279mm (11”) W x 203mm (8”)/279mm (11”) H
• Note: Do not use on satin, semi-gloss, or flat finish paint surfaces

The Saddlebag Support Kit is a pre-drilled ABS backing plate that ensures easy saddlebag installation

• Use with Plain Saddlebag Set (K53000-275)

The Deluxe Cover is constructed of water-resistant polyester and a unique shielded vent system that allows built-up moisture to vent

• Features a reinforced grommet at the bottom hem which allows the cover to be secured to the bike
• Heat-resistant panels in the exhaust area
• Oversized fit allows for easier installation and removal

Lockable pannier cases with 2 x 35 litre capacity

• Will fit most full face helmets
• Pannier cover set in body colour to be ordered separately
• Topcase and Panniers can not be combined

Baseplate for both the 39L and the 47L topcase.

This Top Case is loaded with many functional features that provide a convenient and secure hard luggage solution

• Molded from durable ABS plastic and finished with Kawasaki factory matched paint, the lockable Top Case is large enough to fit most full-face helmets (15”L x 18”W x 12”H)
• Additionally, the Kawasaki Quick Release (KQR) system allows for removal of the case from its mounting base for off vehicle transport
• Colour Panel, Base Plate and Top Case Bracket required and sold separately
• Optional Backrest Pad and top Case Liner available and sold separately
• Not compatible with KQR 28 Litre Panniers

Complete kit with everything you need, Metallic Spark Black Trim and Cover panel to suit Versys 650

• Keep your personal items safe and secure in 28 litres of lockable waterproof storage
• Enough room for all your necessary gear, including most full-faced helmets
• Sleek modern styling, exclusive Kawasaki logo
• Metallic Spark Black colour-matched panels and trim.
• The KQR 28 Litre Hard Pannier Set utilizes the Kawasaki One Key System which allows you to use your ignition key for locking/unlocking.
• integrated mounting system won’t leave behind unsightly brackets when removed
• Panniers are easy to remove without tools – just click on and off your motorcycle
• Individual pannier dimensions: 483mm (19”) L x 305mm (12”) W x 432mm (17”) H with 28 litres storage capacity per side
• Kawasaki dealer installation is required as improper installation may void the accessory warranty
• Kit includes KQR 28 Litre Hard Panniers (99994-0866)
• Deco Stripe Set Metallic Spark Black (99994-0423660)
• Pannier cover, Metallic Spark Black (99994-0422660)
• Pannier fitting kit (99994-0537)
• One Key System (99994-0407)

• Optional Part sold separately KQR 28 Litre Pannier Liner Set (100LUU-0004)

Kit includes - 47 litre Top Box - Mettalic Spark Blcak (660).

Requires 5 parts:
1- Topcase 47L                                            999940899
2- Carrier Plate                                            999940482A
3- Topcase Cover (Metallic Spark Black )        999940577 660 
4- Aluminium Deco Plate Black anodized        999940656
5- Lock Cylinder                                           999940528

Matching cover in bike colour  can be ordered separately (Kit only comes in Black)

This system features the One-Key System, so you can conveniently open the topcase using your ignition key.

The Lock Cylinder Set utilizes the ignition key to create a One Key System for both the panniers and the vehicle

• Once the cylinders are matched to the ignition key, simply set in panniers
• Material: Steel
• Includes: All required hardware
• Important Notes: This accessory must be installed by an authorized Kawasaki Dealer
• Improper installation may void the vehicle and/or accessory warranty.

• Required component to mount KQR 47 Litre Top Case Part # 99994-0899

Rigid, water-resistant bag with compartments makes it easy to pack your cargo and drop into the locking Top Case

• Nylon construction with reflective piping

Purchase as a required component to mount Premium Saddlebag Set (99994-0522) or Soft Saddlebag Set (K5700-3121), sold separately

• Durable powder-coated steel construction with KQR mounting system for efficient installation or removal of accessories once installed
• Optional saddlebag liner available (99994-0745)

Required component of KQR 47 Litre Top Case (99994-0899) (sold separately)

• Includes (1) lock cylinder and all required hardware
• Note: Authorised Kawasaki dealer installation required.
• Ninja 1400GTR owners must reference their vehicle ignition key to determine if a Type A or Type B One Key System is required

Left and right fittings

• Authorized Kawasaki dealer installation required
• Improper installation may void the accessory warranty

Top case with 47 litres of storage space. Will fit most full face helmets (two helmets). Exclusive Kawasaki design.

Must be combined with top case carrier and baseplate. There are two other parts that must be ordered to complete the system.

1: Colour matched cover must be ordered separately.
2: Top Case Bracket must be ordered Separately. (Can not be combined with seatcover)

• System consists of 3 partnumbers:
• 1- Top case bracket
• 2- Top case 47L including Baseplate
• 3- Matching cover (Colour ...)

Protect paint finish from scratches and wear

• Made with durable textured non-slip vinyl
• Sold as a set of 2

Lock your helmet securely and conveniently when you’re off the road

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Steel construction
• All required brackets and hardware included
• Dealer installation required

Help protect your engine shrouds from tip-over damage

• High density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory designed metal brackets
• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Clear touring screen is 150 mm (6 inches) wider and 80 mm (3 inches) taller than the stock windshield

• Made with optically correct polycarbonate plastic
• Central air vent enhances air management
• Kawasaki logo for a factory appearance

Durable ABS moulded construction

• Lockable with quick-release base
• 30 litre capacity is large enough for storing a standard full-face helmet
• Note: Ninja 650 and Z650 models requires the Top Case Colour Matched Trim and Top Case Bracket (99994-0799) (sold separately)
• Note: Versys-X 300 only requires a Top Case Colour Matched Trim (sold separately)
• Authorized Kawasaki dealer installation required
• Improper installation may void the accessory warranty

Help protect your engine from tip-over damage

• High-density black ABS plastic Frame Slider Set features the Kawasaki logo and is mounted with factory designed metal brackets
• Includes required brackets, hardware and installation instructions
• Note: Frame sliders help protect your motorcycle, but will not prevent all types of damage

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip

• Adjust to low, medium, or high settings with the touch of a button
• Indicator light on the left grip improves setting visibility
• Grip Heater Set with all required wiring, brackets and hardware
• Dealer installation recommended

Durable ABS Construction 43 Litre Top Case Lockable with quick-release base

• Measures 406mm (16”) L x 559mm (22”) W x 330mm (13”) H
• 43 Litre capacity (fits one full-face helmet size large)

• 43 Litre Top Case, Top Case Panel (99994-1494-GU)
• 43 Litre Top Case, Fitting Kit (99994-1495)
• 43 Litre Top Case, One Internal Cut Key System (99994-1496)

ERGO-FIT Extended Reach Seat increases the seat height by 25mm (1")

• The seat vinyl is the same cold-resistant, high-elasticity-type material used on the standard seats
• Made to fit and complement the Z650 RS motorcycle
• Includes all necessary hardware

Zippered black nylon liners make it easy to pack your cargo and drop into the locking Panniers

• Once you’ve arrived at your destination, just grab your packed KQR 28 Litre Pannier Liner Set so you can leave the panniers on your motorcycle and get going
• Left and right liner
• Purchase as an optional component of KQR 28 Litre Hard Panniers (99994-0922), sold separately

Colour matched trim covers attach easily to Kawasaki Panniers for custom look

• Required to complete 35L panniers (131LUU0004)
• Not actual colour shown

Backrest Pad adds passenger comfort with an integrated design that attaches to the KQR 47 Litre Top Case

• Purchase as an optional component of KQR 47 Litre Top Case (99994-0899), sold separately
• PVC foam and plastic
• Backrest Pad and all required hardware included

Required component of KQR 47 Litre Top Case (99994-0481/99994-0899) (sold separately)

• Includes (1) lock cylinder and all required hardware
• Note: Authorized Kawasaki dealer installation required.
• Ninja 1400GTR owners must reference their vehicle ignition key to determine if a Type A or Type B One Key System is required

These saddlebags complement the overall look of your bike

• Durable marine-grade vinyl with genuine leather trim adds classic cruiser style
• An interior pocket keeps important papers and documents separate and protected
• A magnetic clasp closure on the lid makes accessing your goods convenient
• KQR or fixed mounting system allows for installation of the Premium Saddlebag Set
• Requires either KQR Bracket Kit, Black (99994-0523B) and KQR Saddlebag Support Set (99994-0521B) or Fixed Saddlebag Support Set (99994-0819) for mounting, sold separately
• 508mm (20”) L x 178mm (7”) W x 279mm (11”) H

Carrier Plate for 47L Top Case

• Keep your personal items safe and secure in 47 litres of lockable, waterproof storage; enough room for two full-face helmets
• Kawasaki’s One Key System allows you to key the lock to your ignition key - refer to the letter on your key to determine if you need a Type A or Type B system
• Kawasaki logos and factory-matched trim give your bike a customized look
• Durable molded ABS construction
• KQR mounting system allows for easy installation or removal once installed so you can be ready for any adventure the road brings
• Requires Base Plate (99994-0620), Color Panel, Trim, and One Key System all sold separately
• Backrest Pad (99994-0494), and Top Case Liner (99994-0497) also sold separately
• Dealer installation is required
• Top Case load limit is 5kg (11 lbs.)
• Dimensions 432mm (17”) L x 584mm (23”) W x 305mm (12”) H

Base plate required to mount

• KQR 47 Litre Top case

Once attached to the topcase provides additional comfort for the pillion passenger.

• Fits to 47 litre topcase

Help protect your engine shrouds from tip-over damage

• High-density black ABS plastic Frame Sliders are mounted with factory-designed metal brackets
• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle but will not prevent all types of damage

Stylish and rugged water-resistant nylon construction with reinforced moulded foam body and zippered lids to hold shape even when empty

• 11 litres per side capacity
• Reflective piping
• 19" Long X 6 1/2" Wide X 11" High
• Includes a set of 2 waterproof liners for packing cargo in wet weather
• Kqr or Fixed mounting system allows for easy installation of the Soft Saddlebags
• Kqr Mounting System requires Kqr Bracket Kit (99994-0523B) and Saddlebag Supports (99994-0521B), sold separately
• Fixed mounting system requires Fixed Saddlebag Support Set (99994-0819) for mounting, sold separately
• Sold as a set of 2

Strong chrome steel Passenger Backrest Frame with 330mm (13”) high riser and all required installation hardware

• Order Plain Pad (39156-0187-MA) or Studded Pad (39156-0118-MA) and Vulcan Emblem (56052-0852) separate

Taped seams and a covered zipper flap make this the perfect waterproof liner for your KQR Saddlebags

• Screen printed Kawasaki logos on both sides of each liner
• Fits KQR Saddlebags (99994-0522) or for KQR Soft Saddlebags (K5700-3121)
• Sold as a set of 2
• 483mm (19") Long X 165mm (6 1/2") Wide X 279mm (11") High

Silver resin Side Panel Set provides colour accents and contributes to functional adventure-style looks

• Required for installing 21 Litre Side Cases (99994-1490)

• 21 Litre Side Cases (99994-1490)
• 21 Litre Side Cases, Fitting Kit (99994-1492)
• 21 Litre Side Cases, One Key System (99994-1566)

Durable powder-coated steel construction Luggage Rack mounts to your Fixed Passenger Backrest (99994-0818)

• Designed by Kawasaki to enhance your Vulcan S styling while providing extra space for whatever you take with you on the road
• 203mm (8”) long x 229mm (9)” wide
• All required brackets and hardware included
• NOTE: Requires Fixed Passenger Backrest (99994-0818), sold separately

Top grain cowhide leather lid with quick-release chrome metal buckles provide essential cruiser style

• Metal reinforced frame holds shape even when empty
• Pre-drilled ABS backing plate ensures an easy installation
• Requires Saddlebag Support Kit, (K99994-0069A), sold separately

Convenient storage for touring and daily use

• Saddlebag Set and Soft Top Case feature a unique rubberized vinyl finish that is water-resistant
• Tank Bag manufactured from ballistic nylon
• Order Soft Top Case, Saddlebags, and Tank Bag separately
• Soft Top Case dimensions: 406mm (16”) L x 356mm (14”) W x 254mm (10”) H, expandable to 343mm (13 ½”) H

The ERGO-FIT reduced reach seat reduces the seat height by 15mm (5/8")

• Made to fit and complement the Ninja H2 SX motorcycle
• PVC foam with vinyl cover
• Includes all necessary hardware

Manufactured from durable ABS nylon, the functional yet stylish and compact design of these front axle sliders adds an extra level of protection to your bike, and helps guard your forks from possible tip-over damage

• With instructions and all necessary mounting hardware included, a high level of protection can be added to your bike
• Note:  Front Axle Sliders help protect your motorcycle, but will not prevent all types of damage

Help protect your vehicle’s bodywork with sturdy Kawasaki branded Frame Sliders

• Slide pads are made from polyurethane plastic for increased durability
• Dealer installation recommended
• Note: Frame sliders help protect your motorcycle, but will not prevent all types of damage

• Clear touring screen is 140 mm (6 inches) wider and 90 mm (3.5 inches) taller than the stock windshield
• Made with optically correct polycarbonate plastic
• Central air vent enhances air management
• Kawasaki logo for a factory appearance

Side cowling guards manufactured from high-density ABS material

• Solid mount metal brackets
• Side cowling needs to be drilled for fitment
• Note:  Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Help protect your engine shrouds from tip-over damage with the Frame Slider Set

• High density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory designed metal brackets
• Replacement pads (39156-1818) available separately
• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Add even more protection with front axle sliders.

• These axle sliders help to prevent damage to your front axle, front axle nut, fork bottoms and brake callipers.
• Front Axle Sliders help protect your motorcycle, but will not prevent all types of damage

Manufactured from durable ABS nylon, the functional yet stylish and compact design of these front axle sliders adds an extra level of protection to your bike, and helps guard your forks from possible tip-over damage

• With instructions and all necessary mounting hardware included, a high level of protection can be added to your bike
• Note:  Front Axle Sliders help protect your motorcycle, but will not prevent all types of damage

Add even more protection with front axle sliders.

• These axle sliders help to prevent damage to your front axle, front axle nut, fork bottoms, and brake calipers.
• This product helps to protect your motorcycle, but will not prevent all types of damage.

Side cowling guards manufactured from high-density ABS material

• The Frame Slider Set features solid mount metal brackets
• Note:  Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Protect your vehicle’s bodywork with sturdy Kawasaki branded Frame Sliders

• Slide pads are made from polyurethane plastic for increased durability
• Chassis mounted brackets have been factory tested and approved for optimal dispersion of impact during vehicle tip-overs

Tank pads (side). Top-quality gel-resin self-adhesive tank protector.

• Semi-transparent allowing the original tank colour to show through.

Help protect your engine shrouds from tip-over damage

• High density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory designed metal brackets
• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Stylish black smoked deflector adds style to your Vulcan S for around-town cruising

• Quantum hard coating protects against scratching
• Requires Fixed Windshield Fork Bracket Kit (99994-0824) sold separately
• Café Deflector is standard on 2017-2022 Vulcan S Café Edition

Clear touring screen made with optically correct polycarbonate plastic for improved visibility and Quantum hard coating to protect against scratching

• 360 mm (14 inch) tall
• NOTE: Requires Fixed Windshield Bracket Kit (99994-0825) and Fixed Fork Bracket Kit (99994-0824) sold separately
• NOTE: 2017-2021 Vulcan S Cafe Edition does not require 99994-0824 (already installed on unit)

Keep your personal items safe and secure in 47 spacious litres of lockable waterproof storage, enough room for two full-face helmets

• Durable ABS construction, Kawasaki logos, and factory-matched paint give your bike a customised look
• Easy to remove and install without tools, with a quick-release base so you can be ready for any adventure the road brings 
• 47 litre storage capacity
• Top Case load limit is 5kg.
• On the Ninja 1000 and Ninja 1000SX, KQR 47 Litre Top Case (99994-0899) is not compatible with KQR 28 Liter Panniers (99994-0564 - Ninja 1000) (99994-0568/99994-1563 - Ninja 1000SX)
• Note: Requires model-specific mounting bracket base or carrier plate. Colour panel and center panel also required and sold separately
• Note: Authorized Kawasaki dealer installation required.

• Not Compatible With Kqr Panniers

The ERGO-FIT reduced reach handlebar increases the rise by 20mm (3/4) over the stock handlebar

Help protect your engine from tip-over damage

• High-density black ABS plastic Frame Slider Set features the Kawasaki logo and is mounted with factory designed metal brackets
• Includes required brackets, hardware, and installation instructions
• Note: Frame sliders help protect your motorcycle, but will not prevent all types of damage

Help protect your engine shrouds from tip-over damage

• Side cowling guards manufactured from high-density molded nylon
• Solid mount metal brackets
• Note: Frame sliders help protect your motorcycle, but will not prevent all types of damage

Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking

• Note: Authorized Kawasaki dealer installation required

Charge your portable devices on the go with this 12-volt DC Power Outlet

• Dealer installation recommended
• Requires Relay Kit (99994-1040), sold separately

The Passenger Seat has a wide, flat surface to ensure comfort

• The seat comes fully assembled and utilizes stock mounting hardware
• Features an embossed Ninja logo
• Designed to complement the Comfort Seat (99994-1875) or the ERGO-FIT reduced reach seat (99994-1268), sold separately

Manufactured from durable ABS nylon, the functional yet stylish and compact design of these front axle sliders adds an extra level of protection to your bike, and helps guard your forks from possible tip-over damage

• With instructions and all necessary mounting hardware included, a high level of protection can be added to your bike in a matter of minutes
• Note:  Front Axle Sliders help protect your motorcycle, but will not prevent all types of damage

Lock your helmet securely and conveniently when you’re off the road

• Chassis mounted lock utilises the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Steel construction
• All required brackets and hardware included
• Authorised Kawasaki dealer installation required

This center stand mounts permanently to the motorcycle

• Helps streamline cleaning and maintenance
• Includes all required hardware
• Standard equipment on some Ninja H2 SX motorcycle models

Manufactured from durable ABS nylon, the functional yet stylish and compact design of these front axle sliders adds an extra level of protection to your bike, and helps guard your forks from possible tip-over damage

• With instructions and all necessary mounting hardware included, a high level of protection can be added to your bike in a matter of minutes
• Note:  Front Axle Sliders help protect your motorcycle, but will not prevent all types of damage

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip

• Adjust to low, medium, or high settings with the touch of a button
• Indicator light on the left grip improves setting visibility
• Grip Heater Set with all required wiring, brackets and hardware
• Dealer installation recommended

Lock your helmet securely and conveniently when you’re off the road

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• NOTE: Authorized Kawasaki dealer installation required

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip

• Adjust to low, medium, or high settings with the touch of a button
• Indicator light on the left grip improves setting visibility
• Grip Heater Set with all required wiring, brackets and hardware
• Dealer installation recommended

Required for installing Top Case with internal cut key.  Check key design. 

• Additional items required for installation and/or use of this product.

Prevent tip-over damage to your front axle, axle nut, fork bottoms and brake calipers

• Manufactured from high density ABS plastic
• Functional yet stylish and compact design
• Includes required brackets, hardware and installation instructions
• Note: Front Axle Sliders help protect your motorcycle but will not prevent all types of damage

Give your passenger additional comfort with this classic style Passenger Grab Bar

• Made from durable chrome plated steel
• Includes all required hardware
• Not compatible with the Side Grip Set (99994-1546)

Give your passenger additional comfort with this classic style Passenger Grab Bar

• Made from durable black steel
• Includes all required hardware
• Not compatible with the Side Grip Set (99994-1556)

Made from durable chrome plated steel

• Includes all required hardware
• Not intended for passenger use while riding
• Not compatible with the Passenger Grab Bar (99994-1544)

Lock your helmet securely and conveniently when you’re off the road

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Steel construction
• All required brackets and hardware included
• Authorized Kawasaki dealer installation required

Screen protector for your digital dashboard

• Will protect the screen against scratches

Prevent tip-over damage to your front axle, axle nut, fork bottoms and brake calipers

• Manufactured from high density ABS plastic
• Functional yet stylish and compact design
• Includes required brackets, hardware and installation instructions
• NOTE: Front Axle Sliders help protect your motorcycle but will not prevent all types of damage

Help protect your engine shrouds from tip-over damage

• High density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory designed metal brackets
• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Help protect your vehicle’s bodywork with this sturdy Kawasaki branded Frame Slider Set

• Slide pads are made from polyurethane plastic for increased durability
• Chassis mounted brackets have been factory tested and approved for dispersion of impact during vehicle tip-overs
• Dealer installation recommended
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Help protect your engine from tip-over damage

• High-density black ABS plastic Frame Slider Set features the Kawasaki logo and is mounted with factory designed metal brackets
• Includes required brackets, hardware and installation instructions
• Note: Frame sliders help protect your motorcycle, but will not prevent all types of damage

Help protect your engine shrouds from tip-over damage

• High density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory designed metal brackets
• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Mounting brackets attach quickly and easily to the fork tubes

• Stylish light tint polycarbonate shield measures 18" (45.7 cm) wide

Install a horn to alert others of your presence while on the job site or the trail

• Mounts internally
• Includes switch

Limited Quantities
Conveniently lock your helmet when you’re off the road with a helmet lock

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Steel construction
• Dealer installation required

Lock your helmet securely and conveniently when you’re off the road

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Note: Authorized Kawasaki dealer installation required

Store your personal items in 17 litres of lockable waterproof storage

• Enough room for all your necessary gear
• Rugged styling to complement the aggressive design of your Kawasaki
• Utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Individual pannier dimensions: 457mm (18 inches) L x 203mm (8 inches) W x 279mm (11 inches) H with 17 litre storage capacity
• 3kg (7 lbs.) max carrying capacity per side
• Polypropylene plastic
• Authorized Kawasaki dealer installation required
• Improper installation may void the accessory warranty
• Not compatible with 30 Liter Top Case (232LUU-0008 or 99994-0937)

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip

• Adjust to low, medium, or high settings with the touch of a button
• Indicator light on the left grip improves setting visibility
• Grip Heater Set with all required wiring, brackets and hardware
• Dealer installation recommended

Durable tubular steel black finish construction with bright aluminium center plate mounts securely to the rear chassis

• Provides (6.5 pound) 3.0 Kg cargo capacity
• Rack dimensions approximately 10" x 10"
• Includes four welded bungee hooks

Give your passenger additional comfort with this classic style passenger grab bar

• Made from durable chrome plated steel
• Includes all required mounting hardware
• Not compatible with Luggage Rack (99994-1448)

Stylish Hook can be used as a bungie cord attachment point

• Set includes 2 hook nuts

ERGO-FIT reduced reach seat reduces the seat height 15mm (5/8 inch)

• Made to tailor fit and compliment the Ninja H2 SX
• Includes all necessary hardware

This center stand mounts permanently to your motorcyce

• Includes all required hardware

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimise added bulk to the grip

• Adjust to low, medium, or high settings with the touch of a button
• Indicator light on the left grip improves setting visibility
• Grip Heater Set with all required wiring, brackets, and hardware
• Dealer installation recommended

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip

• Adjust to low, medium, or high settings with the touch of a button
• Indicator light on the left grip improves setting visibility
• Grip Heater Set with all required wiring, brackets, and hardware
• Dealer installation recommended

100% waterproof PVC tarpaulin with electronically welded seams

• Watertight roll-top closure with self-fastening and quick release straps
• Removable internal stiffeners help the bag hold its shape
• Air purge valve for ease of packing (compression)
• Four quick-release web-loop straps for universal attachment
• Reflective accents (strips) for better visibility
• Dimensions: 16" L x 8" W x 13.5" H
• Capacity: Approximately 22 Litres

The interchangeable  ERGO-FIT extended reach seat moves hip support back 25mm (1”) to suit most riders 6’1” and taller

• Made to tailor fit and complement the Vulcan S motorcycle, this seat will help riders find the right reach to the ground while keeping things comfortable
• Gel insert evens out seating pressure and requires no break-in
• PVC foam with vinyl cover
• Not compatible with Passenger Seat (99994-0569)

Breathable 600 denier Sur Last fabric with softened interior surface, the Premium Motorcycle Cover offers the excellent protection for your motorcycle

• This cover features heat shields in exhaust areas and metallic silk-screened logos
• Cover will not fit motorcycles with saddlebags attached

Durable, scratch-resistant material and bubble-shaped windshield offers a great look 30mm of additional wind protection

• Note: Ninja decal 56054-1088, on stock windshield can be ordered separately

This kit has all you need to be able to fit the Medium KQR windshield.

• KQR medium windshield, Part # (99994-0633)
• KQR bracket, Part # (99994-0526B)
• KQR Windshield Fork Leg Bracket (99994-0546)

Clear touring screen made with optically correct polycarbonate plastic for improved visibility and Quantum hard coating to protect against scratching

• KQR mounting system allows for easy installation or removal once installed
• 360 mm (14 inch) tall
• NOTE: Requires KQR Mounting Bracket Kit (99994-0526B) and KQR Fork Bracket Kit (99994-0546) sold separately
• NOTE: 2016 Vulcan S Cafe Edition does not require 99994-0546 (already installed on unit)

Lock your helmet securely and conveniently when you’re off the road

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Note: Authorized Kawasaki dealer installation required

Padded Fixed Passenger Backrest provides passenger comfort

• Powder-coated steel construction
• 203mm (8") tall from the seat surface
• Designed to mount optional Fixed Luggage Rack (99994-0846), sold separately

Clear touring screen made with optically correct polycarbonate plastic for improved visibility and Quantum hard coating to protect against scratching

• 435 mm (17 1/4 inch) tall
• NOTE: Requires Fixed Windshield Bracket Kit (99994-0825) and Fixed Fork Bracket Kit (99994-0824) sold separately
• NOTE: 2017-2021 Vulcan S Cafe Edition does not require 99994-0824 (already installed on unit)

Kawasaki Quick Release (KQR) 28 Litre Panniers offer a multitude of design features that add to the functionality, fitment, and usability of the pannier system. The KQR Pannier Kit also adds the ultimate versatility and touring capability to your Kawasaki vehicle. Integrated fitment, one key system, and sleek design, are sure to enhance your ride.
To complete the KQR 28 Litre Pannier Kit the following items are required:
KQR 28 Litre Hard Pannier Set – 99994-0922
Fitting Kit - Versys 650 - (99994-0537) - Ninja H2 SX - (99994-1125)  - Ninja 1000SX - (99994-0867)
Check with your dealership for the correct fitting kit
Colour Panel Set – All available colour-matched options are listed in the Bags, Luggage section.
Trim Set – All available colour-matched options are listed in the Bags, Luggage section.
Lock Cylinder Set – (99994-0407) (External cut keys)
Lock Cylinder Set - Internal cut keys (99994-1566)

• KQR Panniers click on and off your motorcycle in seconds, no tools are required
• Integrated mounting system leaves behind no unsightly brackets when panniers are removed
• Transition between full touring functionality and sport styling with ease
• One Key System - Pannier locks utilise your vehicles ignition key
• Large enough to fit all your necessary gear; including most full faced helmets
• Sleek modern styling matches the aggressive design of your Kawasaki
• Colour matched panels and trim perfectly match your vehicle paint
• Exclusive Kawasaki logo
• Waterproof to protect contents from unfavourable weather
• Internal straps keep gear secure during your ride
• Optional pannier liners sold separately (100LUU-0004)
• Individual saddlebag dimensions 305mm (12") W x 432mm (17") H x 483mm (19") L
• Note: For the Ninja 1000SX - Not compatible with KQR 47 Litre Top Case (99994-0899)
• Note: This accessory must be installed by an authorized Kawasaki Dealer. 
• Improper installation may void the vehicle and/or accessory warranty

This Knee Pad Set for the Z400 helps protect your tank’s paint finish from scratches and ordinary wear and tear

• Made with textured non-slip vinyl

Help protect your engine shrouds from tip-over damage

• High density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory designed metal brackets
• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

The ERGO-FIT reduced reach handlebar decreases reach by 25mm (1") to suit most riders 5’6” and under

• Made to tailor fit and complement the Vulcan S, this accessory handlebar combined with the standard adjustable clutch and brake levers allows riders to find a comfortable reach
• Handlebar, cable ties, and pre-installed left grip included