Parts & Accessories

Charge your portable devices on the go with a 12-volt DC Power Outlet

• Installs directly into one of two available knock-out ports on the Versys 1000 dash panel
• Versys 650 MY 2022 Require Relay Kit (99994-1677)
• Versys 650 MY 2021 - 2015 require relay kit (99994-0556) sold separately
• KLR650 requires relay kit (99994-1502) sold separately
• Dealer installation recommended

Purchase as a required component to mount Gear Position Indicator (99994-0540), DC Power Outlet (99994-0541), LED Light Bar (99994-0511), or other electrical accessories

• Only one Relay Kit required per Vulcan S motorcycle

Invite a friend along for the ride with added passenger comfort and accommodations

• Integrated brackets are constructed from black powder-coated steel to match the overall look of the bike
• Peg-style Passenger Footpeg Set is rubber-coated for durability and grip while providing a minimalist, clean look when riding solo
• Powder-coated steel
• All necessary brackets and hardware included
• Required component for Passenger Seat (99994-0558) or ERGO-FIT extended reach passenger Seat (K53001-252C), sold separately

Protect paint finish from scratches and wear

• Made with durable textured non-slip vinyl
• Sold as a set of 2

Made to tailor fit and compliment the Versys-X 300 motorcycle, this seat enhances riding comfort for taller riders

• The ERGO-FIT extended reach seat is 25mm (1 inch) taller than stock and comes fully assembled
• PVC foam with vinyl cover

Purchase as a required component to mount DC Power Outlet (99994-0997), LED Auxiliary Light Set (99994-0996), or other electrical accessories

• Only one Relay Kit required per Versys-X 300 motorcycle

Purchase as a required component to mount DC Power Outlet (99994-1113) or other electrical accessories, sold separately

• Only one Relay Kit required
• DC Power Outlet (99994-1113)

Protect paint finish from scratches and wear

• Made with durable textured non-slip vinyl
• Standard equipment on Ninja H2 SX SE

Prevent tip-over damage to your front axle, axle nut, fork bottoms and brake calipers

• Manufactured from high density ABS plastic
• Functional yet stylish and compact design
• Includes required brackets, hardware and installation instructions
• Note: Front Axle Sliders help protect your motorcycle but will not prevent all types of damage

The ERGO-FIT reduced reach handlebar decreases reach by 25mm (1 inch) to suit most riders 5’6” and under

• Made to tailor fit and complement the Vulcan S, this accessory handlebar combined with the standard adjustable clutch and brake levers allows riders to find a comfortable reach

Charge portable devices on the go with a 12-volt DC power outlet that mounts easily next to your bike’s gauges

• Minimal installation required
• All required brackets and hardware included
• Requires Relay Kit (99994-0510), sold separately
• 21mm (4/5”) diameter socket

Charge your portable devices on the go with a 12-volt DC power outlet that mounts easily next to your bike’s gauges

Give your passenger additional comfort with this classic style Passenger Grab Bar

• Made from durable chrome-plated steel
• Includes all required hardware
• Not compatible with the Side Grip Set (99994-1014)

Large storage bin fits under passenger side of seat. Lift seat bottom for access.

• Approximately 13 litres volume.

Convenient storage for touring and daily use

• Saddlebag Set and Soft Top Case feature a unique rubberized vinyl finish that is water-resistant
• Tank Bag manufactured from ballistic nylon
• Order Soft Top Case, Saddlebags, and Tank Bag separately
• Saddlebag Set dimensions: 406mm (16”) L x 279mm (11”) W x 178mm (7”) H

Conveniently lock your helmet when you’re off the bike.

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for operation
• Steel construction
• Dealer installation required

Mount this luggage rack to your rear fender for extra cargo capacity

• Developed by Kawasaki to integrate with the clean, modern lines of your Vulcan S motorcycle
• Powder coated steel
• All required brackets and hardware included
• Not compatible with accessory passenger seats
• 356mm (14”) L x 190mm (71/2”) W
• Maximum Load 2.2kg.

Sporty scratch-resistant smoked meter cover

• 100mm (4 inches) taller and 90mm (3.5 inches) wider than stock meter cover

Charge your portable devices on the go with this 12-volt DC Power Outlet

• Installs into dash panel
• Dealer installation recommended
• Requires Relay Kit (99994-1004), sold separately

Made from durable chrome-plated steel

• Includes all required hardware
• Helps maneuver the Z900 RS motorcycle when not in use
• Not intended for passenger use while riding
• Not compatible with the Passenger Grab Bar (99994-1013)

Made to tailor fit and complement the Ninja 400 and Z400 motorcycles, this seat enhances riding comfort for taller riders

• The ERGO-FIT extended reach seat is 25mm taller than stock and comes fully assembled
• Utilizes factory seat base and components for a factory fit
• PVC foam with vinyl cover

Charge your portable devices on the go with this 12-volt DC Power Outlet

• Installs directly into knock-out port on the dash panel
• Standard equipment on Ninja H2 SX SE
• Dealer installation recommended

Taller Meter Cover for the Z400 raises airflow from the front cowl while maintaining an overall aggressive appearance

• Manufactured from slightly translucent black high density ABS plastic
• 51mm (2”) wider and 102mm (4”) higher than stock meter cover
• Includes required brackets, hardware, and installation instructions

The ERGO-FIT reduced reach seat reduces the seat height by 15mm (5/8")

• Made to fit and complement the Ninja H2 SX motorcycle
• PVC foam with vinyl cover
• Includes all necessary hardware

Prevent tip-over damage to your front axle, axle nut, fork bottoms and brake calipers

• Manufactured from high density ABS plastic
• Functional yet stylish and compact design
• Includes required brackets, hardware and installation instructions
• Note: Front Axle Sliders help protect your motorcycle but will not prevent all types of damage

Help protect your engine shrouds from tip-over damage

• High-density black ABS plastic Frame Sliders are mounted with factory-designed metal brackets
• Includes required brackets, hardware and installation instructions
• Note: Frame Sliders help protect your motorcycle but will not prevent all types of damage

Secure your personal items in 21 litres of lockable storage

• Rugged styling to complement the aggressive design of your Kawasaki vehicle
• Utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Individual side case dimensions: 467mm (18.4”) L x 238mm (9.4”) W x 351mm (13.8”) H with 21 litre storage capacity
• 21 Litre Side Cases clip to sturdy support brackets
• Requires Fitting Kit (99994-1492), Side Panel Set (99994-1491-GU), and One Key System (99994-1566)
• Silver resin Side Panel Set provides colour accents and contributes to functional adventure-style looks

• 21 Liter Side Cases, Side Panel Set (99994-1491-GU)
• 21 Liter Side Cases, Fitting Kit (99994-1492)
• 21 Liter Side Cases, One Key System (99994-1566)

Help protect your tank’s paint finish from scratches and ordinary wear and tear

• Made with textured non-slip vinyl

Made from durable black steel

• Includes all required hardware
• Not intended for passenger use while riding
• Not compatible with the Passenger Grab Bar (99994-1545)

ERGO-FIT Reduced Reach Seat reduces the seat height by 25mm (1") and has a narrowed front

• The seat vinyl is the same high-elasticity-type material used on the standard seat
• Made to fit and complement the W800 motorcycle
• Includes all necessary mounting hardware

ERGO-FIT reduced reach seat reduces the seat height by 20mm (4/5") and has a narrowed front

• The seat area has deeper cushioning for added long distance comfort
• Made to fit and complement the Versys 1000 SE
• Includes all necessary hardware

ERGO-FIT reduced reach seat reduces the seat height by 25mm (1") and has a narrowed front

• The seat vinyl is the same cold-resistant, high-elasticity-type material used on the standard seats
• Made to fit and complement the Z900 RS motorcycle
• Includes all necessary hardware

Lock your helmet securely and conveniently when you’re off the road

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Steel construction
• All required brackets and hardware included
• Authorized Kawasaki dealer installation required

Made to tailor fit and complement the Ninja 400 and Z 400 motorcycle, this seat enhances riding comfort for taller riders

• The ERGO-FIT extended reach seat is 30mm taller than stock and comes fully assembled
• Utilises factory seat base and components for a factory fit
• PVC foam with vinyl cover

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip

• Adjust to low, medium, or high settings with the touch of a button
• Indicator light on the left grip improves setting visibility
• Grip Heater Set with all required wiring, brackets, and hardware
• Dealer installation recommended

Black painted steel construction luggage rack mounts to the rear frame

• Designed by Kawasaki to enhance your W800 motorcycle styling while providing extra space for whatever you take with you on the road
• All required brackets and hardware included
• Not compatible with Passenger Grab Bar (99994-1223)

Chrome plated steel construction luggage rack mounts to the rear frame

• Designed by Kawasaki to enhance your W800 motorcycle styling while providing extra space for whatever you take with you on the road
• All required brackets and hardware included
• Not compatible with Passenger Grab Bar (99994-1223)

Scratch-resistant clear windscreen, designed to provide additional rider comfort.

• Kawasaki branded product, produced and developed by Kawasaki and fully road legal.

Chrome rectangular steel bar construction

• Measures: 191mm (7½”) L x 178mm (7”) W
• Cargo capacity 2.2 kg (5 lbs.)
• Passenger Backrest (K99994-0066A) required for 900 Classic models, sold separately

Designed to match your Vulcan 900 Custom motorcycle chevron styling

• Padded mini-backrest is 203mm (8) H from seat surface
• Mounts easily with supplied hardware
• Designed to mount the Luggage Rack (K53020-378 or K53020-378B), sold separately

Designed to match your Vulcan® 900 Custom motorcycle chevron styling

• Padded mini-backrest is 203mm (8”) H from seat surface
• Mounts easily with supplied hardware
• Designed to mount the Luggage Rack (K53020-378 or K53020-378B), sold separately

Chrome-plated tubular steel design to match your VN900 Custom chevron styling

• Rack measures 9" wide x 8" long
• Mounts easily with supplied hardware
• Cargo weight limit 2.2kg 
• K53020-377 backrest required (sold separately)

Designed to match your Vulcan 900 Custom motorcycle chevron styling

• Rack measures 229mm (9”) W x 203mm (8”) L
• Mounts easily with supplied hardware
• Cargo weight limit 2.2kg (5 lbs.)
• Backrest (K53020-377B) required, sold separately

Clear touring screen made with optically correct polycarbonate plastic for improved visibility and Quantum hard coating to protect against scratching

• KQR mounting system allows for easy installation or removal once installed
• 435 mm (17 1/4 inch) tall
• Note: Requires KQR Mounting Bracket Kit (99994-0526B) and KQR Fork Bracket Kit (99994-0546) sold separately
• Note: 2016 Vulcan S Cafe Edition does not require 99994-0546 (already installed on unit)

Chrome steel construction Luggage Rack mounts to your Passenger Backrest

• Designed by Kawasaki to enhance your Vulcan S styling while providing extra space for whatever you take with you on the road
• 20.3cm long X 22.8cm wide (8” long x 9” wide)
• NOTE: Requires KQR Passenger Backrest (99994-0518) and KQR Bracket Kit (99994-0523) (sold separately)

Made to tailor fit and complement the Ninja 650 motorcycle, this seat enhances riding comfort for taller riders

• The ERGO-FIT extended reach seat is 25mm (1 inch) taller than stock and comes fully assembled
• Utilizes factory seat base and components for a factory fit
• PVC foam with vinyl cover
• Includes all parts needed to replace the stock seat
• Stylish carbon fiber pattern trim and embroidered Kawasaki logo

ERGO-FIT reduced reach seat reduces the seat height 35mm (1 3/8") and has a narrowed front, facilitating the reach to the ground for increased confidence and comfort

• The seat leather is the same cold-resistant, high-elasticity-type material used on the standard seats
• Made to fit and complement the KLR650 motorcycle
• Includes all necessary hardware
• Utilizes factory seat base
• Fits 2022~ KLR650 & KLR650 Adventure

Reduced reach seat reduces the seat height by 20mm (4/5") and has a narrowed front

• The seat area has deeper cushioning for added long distance comfort
• Made to fit and complement the Versys 1000 motorcycle
• Includes all necessary hardware

Heated hand grips with adjustable heat level

• LED display to show selected heat level
• Includes automatic battery saver function

Required component to move footpegs to extended reach position Installation Instructions & Info

Required component to move footpegs to reduced reach position

Installation Instructions & Info

Required component to mount Premium Saddlebag Set (99994-0522) or Soft Saddlebag Set (K57003-121) (sold separately)

• Durable powder-coated steel construction
• Sold as a set of 2

Help protect your engine shrouds from tip-over damage

• High density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory designed metal brackets
• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use the ignition key for unlocking

• Steel construction
• All required brackets and hardware included
• Dealer installation required

The ERGO-FIT reduced reach handlebar increases the rise by 20mm (3/4”) over the stock handlebar

ERGO-FIT reduced reach seat reduces the seat height 15mm (5/8 inch)

• Made to tailor fit and compliment the Ninja H2 SX motorcycles
• Includes all necessary hardware

• Protect paint finish from scratches and wear
• Made with durable textured non-slip vinyl

Made to tailor fit and complement the Z H2 motorcycle, this seat enhances riding comfort for taller riders

• The ERGO-FIT extended reach seat is 10mm (2/5") taller than stock and comes fully assembled
• Utilizes factory seat base and components for a factory fit
• PVC foam with vinyl cover
• Includes all parts needed to replace the stock seat

Help protect your engine shrouds from tip-over damage

• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Limited Quantities Help protect your tank’s paint finish from scratches and ordinary wear and tear

• Replaces the original silver trim

This passenger seat matches the Vulcan S stock seat for a uniform look

• Polyurethane foam with vinyl cover
• Requires Passenger Footpegs (99994-0570) (sold separately)
• Use with ERGO-FIT Mid Reach (Original seat) or Reduced Reach Seat (99994-0876 / 99994-1559) (sold separately)
• Not compatible with ERGO-FIT extended reach seat (K53001-251C) (sold separately)

The interchangeable ERGO-FIT reduced reach seat moves riders forward 2 inches to suit most riders 5’6” and under

• Made to tailor fit and complement the Vulcan S, this seat will help riders find the right reach to the ground while keeping things comfortable
• Note: Not compatible with ERGO-FIT extended reach passenger seat (K53001-252C)

Stock handlebar end caps finished in chrome

Clear touring screen made with optically correct polycarbonate plastic for improved visibility and Quantum hard coating helps to protect against scratching

• 80 mm (3") taller and 40 mm (1.5") wider than stock windshield

Keep your hands warm on the road with an ergonomically designed heat system to minimize added bulk to the grip

• Adjustable between low, medium and high settings with the touch of a button
• Indicator light makes viewing your settings easy at night
• Grip set with all required, wiring, brackets and hardware
• Dealer installation recommended

Help keep your hands warm on the road with an ergonomically designed grip heater system to minimize added bulk to the grip

• Adjusts between low, medium, and high settings with the touch of a button
• Indicator light makes viewing your settings easy day or night
• Grip set with all required wiring, brackets, and hardware
• Dealer installation recommended
• Requires Relay Kit (99994-1502), sold separately

• Relay Kit (99994-1502)

Made to tailor fit and complement the Z H2 motorcycle, this seat enhances riding comfort for taller riders

• The ERGO-FIT extended reach seat is 20mm (4/5") taller than stock and comes fully assembled
• Utilizes factory seat base and components for a factory fit
• PVC foam with vinyl cover
• Includes all parts needed to replace the stock seat

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip

• Adjust to low, medium, or high settings with the touch of a button
• Indicator light on the left grip improves setting visibility
• Grip Heater Set with all required wiring, brackets and hardware
• Dealer installation recommended
• Note: Requires Relay Kit (99994-1677), sold separately

Give your passenger additional comfort with this classic style passenger grab bar

• Made from durable black painted steel
• Includes all required mounting hardware
• Not compatible with Luggage Rack (99994-1224)

Keep your hands warm on the road with an ergonomically designed heat system to minimize added bulk to the grip

• Adjustable between low, medium, and high settings with the touch of a button
• Indicator light makes viewing your settings easy at night
• Grip set with all required, wiring, brackets, and hardware
• Dealer installation recommended

Made to tailor fit and complement the Z900 motorcycle, this seat enhances riding comfort for smaller riders

• The ERGO-FIT reduced reach seat reduces the seat height by 20mm (4/5 inch) and has a narrowed front
• Utilizes factory seat base and components for a factory fit
• PVC foam with vinyl cover
• Includes all parts needed to replace the stock seat

Complete heated grip kit replaced stock grips and throttle

• Note: Requires Relay Kit (99994-0195) 2010-2014 or (99994-0556) 2015-2018, sold separately

Keep your hands warm on the road with an ergonomically designed heat system to minimise added bulk to the grip

• Adjusts between low, medium and high settings with the touch of a button
• Indicator light improves setting visibility
• Rubber grips with metal brackets
• Grip set with all required wiring, brackets and hardware
• Dealer installation recommended

Give passengers room to stretch out

• Seat back is 25mm (1) thicker and 50mm (2) wider than the optional Passenger Seat
• Firm foam with a gel insert provides long-distance support and comfort, while the carbon fiber trim matches the ERGO-FIT extended reach seat for a sleek overall look
• PVC foam with vinyl cover
• Not compatible ERGO-FIT reduced reach or mid-reach seats
• Requires Passenger Footpegs (99994-0570), sold separately

Quick detachable passenger backrest installs and removes in seconds

• Keyed lock provides security
• Requires KQR Mount Kit (K53020-405)
• Optional KQR Luggage Rack (K53020-408), sold separately

Convenient storage for touring and daily use

• Saddlebags and Soft Top Case feature a unique rubberized vinyl finish that is water-resistant
• Tank Bag manufactured from ballistic nylon
• Order Soft Top Case, Saddlebags, and Tank Bag separately

Rugged, water-resistant nylon construction with reinforced foam body and lid to hold shape even when empty

• Compartment at front of lid with view window for toll transponder, coins, etc.
• Zippered pocket at front of bag to hold small items
• Dual outlet ports
• Reflective piping for night visibility
• Convenient carrying handle
• Expandable feature adds 76mm (3) of vertical storage capacity (20 litres of maximum capacity)
• Exclusive Kawasaki zipper pulls and embossed logo
• Secures firmly to tank using a three-way custom mounting system consisting of a clip, a hook-and-loop strip and a lightweight magnetic skirt with a non-scratch rubberized coating to protect paint finish
• Do not use on satin, semi-gloss or flat finish fuel tank surfaces
• Tank Bag dimensions 432mm (17) L X 279mm (11) W X 132mm (6)/229mm (9) H

Rugged, water-resistant nylon construction with reinforced foam body and lid to hold shape even when empty

• Compartment at front of lid with view window for toll transponder, coins, etc.
• Replacement Tank Bag Tray Cover (K57003-117) available separately
• Zippered pocket at front of bag to hold small items
• Dual outlet ports
• Reflective piping for night visibility
• Convenient carrying handle
• Expandable feature adds 76mm (3”) of vertical storage capacity (20 litres of maximum capacity)
• Exclusive Kawasaki zipper pulls and embossed logo
• Attaches to tank using a three-way custom mounting system consisting of a clip, a hook-and-loop strip and a lightweight magnetic skirt with a non-scratch rubberized coating to protect paint finish
• Do not use on satin, semi-gloss or flat finish fuel tank surfaces
• Tank Bag dimensions 432mm (17”) L  X 279mm (11”) W X 132mm (6”)/229mm (9”) H

Rugged, water-resistant nylon construction with reinforced foam body and lid to holdshape even when empty.

• Faux carbon inserts, custom zipper pulls and integrated Kawasaki patch on lid add style.
• Clear window tray at front of lid for toll transponder, coins, etc.
• 18 litre cargo capacity with expandable feature to add 3" of vertical storage capacity (maximum capacity 21 litres)
• Reflective piping for additional night time visibility
• Conveniently placed handle allows for easy transport when off bike
• Internal mesh pocket keeps small items separate
• Power/drink tube port at top of bag for direct access to electronic devices, hydration systems, etc.
• Mounts to fuel tank using custom dual straps and lightweight magnetic skirt with non-scratch rubberized coating to help protect paint finish
• Rain cover included17" long x 11" wide x 6"/9" high

The Soft Top Case features rugged, water-resistant nylon construction with reinforced foam body and lid to hold shape even when empty

• Faux carbon inserts, custom zipper pulls and integrated Kawasaki patch on lid add style
• 18 litre cargo capacity with expandable feature to add 76mm (3”) of vertical storage capacity (maximum capacity 21 liters)
• Reflective piping
• Conveniently placed handle allows for easy transport when off the bike
• Mounts to rear fender using custom quad side straps and steel center bracket with non-scratch rubberized coating to help protect paint finish
• Rain cover included
• 457mm (18”) L x 279mm (11”) W x 203mm (8”)/279mm (11”) H
• Note: Do not use on satin, semi-gloss, or flat finish paint surfaces

The Saddlebag Support Kit is a pre-drilled ABS backing plate that ensures easy saddlebag installation

• Use with Plain Saddlebag Set (K53000-275)

The Deluxe Cover is constructed of water-resistant polyester and a unique shielded vent system that allows built-up moisture to vent

• Features a reinforced grommet at the bottom hem which allows the cover to be secured to the bike
• Heat-resistant panels in the exhaust area
• Oversized fit allows for easier installation and removal

Lockable pannier cases with 2 x 35 litre capacity

• Will fit most full face helmets
• Pannier cover set in body colour to be ordered separately
• Topcase and Panniers can not be combined

Baseplate for both the 39L and the 47L topcase.

This Top Case is loaded with many functional features that provide a convenient and secure hard luggage solution

• Molded from durable ABS plastic and finished with Kawasaki factory matched paint, the lockable Top Case is large enough to fit most full-face helmets (15”L x 18”W x 12”H)
• Additionally, the Kawasaki Quick Release (KQR) system allows for removal of the case from its mounting base for off vehicle transport
• Colour Panel, Base Plate and Top Case Bracket required and sold separately
• Optional Backrest Pad and top Case Liner available and sold separately
• Not compatible with KQR 28 Litre Panniers

Complete kit with everything you need, Metallic Spark Black Trim and Cover panel to suit Versys 650

• Keep your personal items safe and secure in 28 litres of lockable waterproof storage
• Enough room for all your necessary gear, including most full-faced helmets
• Sleek modern styling, exclusive Kawasaki logo
• Metallic Spark Black colour-matched panels and trim.
• The KQR 28 Litre Hard Pannier Set utilizes the Kawasaki One Key System which allows you to use your ignition key for locking/unlocking.
• integrated mounting system won’t leave behind unsightly brackets when removed
• Panniers are easy to remove without tools – just click on and off your motorcycle
• Individual pannier dimensions: 483mm (19”) L x 305mm (12”) W x 432mm (17”) H with 28 litres storage capacity per side
• Kawasaki dealer installation is required as improper installation may void the accessory warranty
• Kit includes KQR 28 Litre Hard Panniers (99994-0866)
• Deco Stripe Set Metallic Spark Black (99994-0423660)
• Pannier cover, Metallic Spark Black (99994-0422660)
• Pannier fitting kit (99994-0537)
• One Key System (99994-0407)

• Optional Part sold separately KQR 28 Litre Pannier Liner Set (100LUU-0004)

Kit includes - 47 litre Top Box - Mettalic Spark Blcak (660).

Requires 5 parts:
1- Topcase 47L                                            999940899
2- Carrier Plate                                            999940482A
3- Topcase Cover (Metallic Spark Black )        999940577 660 
4- Aluminium Deco Plate Black anodized        999940656
5- Lock Cylinder                                           999940528

Matching cover in bike colour  can be ordered separately (Kit only comes in Black)

This system features the One-Key System, so you can conveniently open the topcase using your ignition key.

The Lock Cylinder Set utilizes the ignition key to create a One Key System for both the panniers and the vehicle

• Once the cylinders are matched to the ignition key, simply set in panniers
• Material: Steel
• Includes: All required hardware
• Important Notes: This accessory must be installed by an authorized Kawasaki Dealer
• Improper installation may void the vehicle and/or accessory warranty.

• Required component to mount KQR 47 Litre Top Case Part # 99994-0899

Rigid, water-resistant bag with compartments makes it easy to pack your cargo and drop into the locking Top Case

• Nylon construction with reflective piping

Purchase as a required component to mount Premium Saddlebag Set (99994-0522) or Soft Saddlebag Set (K5700-3121), sold separately

• Durable powder-coated steel construction with KQR mounting system for efficient installation or removal of accessories once installed
• Optional saddlebag liner available (99994-0745)

Required component of KQR 47 Litre Top Case (99994-0899) (sold separately)

• Includes (1) lock cylinder and all required hardware
• Note: Authorised Kawasaki dealer installation required.
• Ninja 1400GTR owners must reference their vehicle ignition key to determine if a Type A or Type B One Key System is required

Left and right fittings

• Authorized Kawasaki dealer installation required
• Improper installation may void the accessory warranty

Top case with 47 litres of storage space. Will fit most full face helmets (two helmets). Exclusive Kawasaki design.

Must be combined with top case carrier and baseplate. There are two other parts that must be ordered to complete the system.

1: Colour matched cover must be ordered separately.
2: Top Case Bracket must be ordered Separately. (Can not be combined with seatcover)

• System consists of 3 partnumbers:
• 1- Top case bracket
• 2- Top case 47L including Baseplate
• 3- Matching cover (Colour ...)

Protect paint finish from scratches and wear

• Made with durable textured non-slip vinyl
• Sold as a set of 2

Lock your helmet securely and conveniently when you’re off the road

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Steel construction
• All required brackets and hardware included
• Dealer installation required

Help protect your engine shrouds from tip-over damage

• High density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory designed metal brackets
• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Clear touring screen is 150 mm (6 inches) wider and 80 mm (3 inches) taller than the stock windshield

• Made with optically correct polycarbonate plastic
• Central air vent enhances air management
• Kawasaki logo for a factory appearance

Durable ABS moulded construction

• Lockable with quick-release base
• 30 litre capacity is large enough for storing a standard full-face helmet
• Note: Ninja 650 and Z650 models requires the Top Case Colour Matched Trim and Top Case Bracket (99994-0799) (sold separately)
• Note: Versys-X 300 only requires a Top Case Colour Matched Trim (sold separately)
• Authorized Kawasaki dealer installation required
• Improper installation may void the accessory warranty

Help protect your engine from tip-over damage

• High-density black ABS plastic Frame Slider Set features the Kawasaki logo and is mounted with factory designed metal brackets
• Includes required brackets, hardware and installation instructions
• Note: Frame sliders help protect your motorcycle, but will not prevent all types of damage

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip

• Adjust to low, medium, or high settings with the touch of a button
• Indicator light on the left grip improves setting visibility
• Grip Heater Set with all required wiring, brackets and hardware
• Dealer installation recommended

Durable ABS Construction 43 Litre Top Case Lockable with quick-release base

• Measures 406mm (16”) L x 559mm (22”) W x 330mm (13”) H
• 43 Litre capacity (fits one full-face helmet size large)

• 43 Litre Top Case, Top Case Panel (99994-1494-GU)
• 43 Litre Top Case, Fitting Kit (99994-1495)
• 43 Litre Top Case, One Internal Cut Key System (99994-1496)

ERGO-FIT Extended Reach Seat increases the seat height by 25mm (1")

• The seat vinyl is the same cold-resistant, high-elasticity-type material used on the standard seats
• Made to fit and complement the Z650 RS motorcycle
• Includes all necessary hardware

Zippered black nylon liners make it easy to pack your cargo and drop into the locking Panniers

• Once you’ve arrived at your destination, just grab your packed KQR 28 Litre Pannier Liner Set so you can leave the panniers on your motorcycle and get going
• Left and right liner
• Purchase as an optional component of KQR 28 Litre Hard Panniers (99994-0922), sold separately

Colour matched trim covers attach easily to Kawasaki Panniers for custom look

• Required to complete 35L panniers (131LUU0004)
• Not actual colour shown

Backrest Pad adds passenger comfort with an integrated design that attaches to the KQR 47 Litre Top Case

• Purchase as an optional component of KQR 47 Litre Top Case (99994-0899), sold separately
• PVC foam and plastic
• Backrest Pad and all required hardware included

Required component of KQR 47 Litre Top Case (99994-0481/99994-0899) (sold separately)

• Includes (1) lock cylinder and all required hardware
• Note: Authorized Kawasaki dealer installation required.
• Ninja 1400GTR owners must reference their vehicle ignition key to determine if a Type A or Type B One Key System is required

These saddlebags complement the overall look of your bike

• Durable marine-grade vinyl with genuine leather trim adds classic cruiser style
• An interior pocket keeps important papers and documents separate and protected
• A magnetic clasp closure on the lid makes accessing your goods convenient
• KQR or fixed mounting system allows for installation of the Premium Saddlebag Set
• Requires either KQR Bracket Kit, Black (99994-0523B) and KQR Saddlebag Support Set (99994-0521B) or Fixed Saddlebag Support Set (99994-0819) for mounting, sold separately
• 508mm (20”) L x 178mm (7”) W x 279mm (11”) H

Carrier Plate for 47L Top Case

• Keep your personal items safe and secure in 47 litres of lockable, waterproof storage; enough room for two full-face helmets
• Kawasaki’s One Key System allows you to key the lock to your ignition key - refer to the letter on your key to determine if you need a Type A or Type B system
• Kawasaki logos and factory-matched trim give your bike a customized look
• Durable molded ABS construction
• KQR mounting system allows for easy installation or removal once installed so you can be ready for any adventure the road brings
• Requires Base Plate (99994-0620), Color Panel, Trim, and One Key System all sold separately
• Backrest Pad (99994-0494), and Top Case Liner (99994-0497) also sold separately
• Dealer installation is required
• Top Case load limit is 5kg (11 lbs.)
• Dimensions 432mm (17”) L x 584mm (23”) W x 305mm (12”) H

Base plate required to mount

• KQR 47 Litre Top case

Once attached to the topcase provides additional comfort for the pillion passenger.

• Fits to 47 litre topcase

Help protect your engine shrouds from tip-over damage

• High-density black ABS plastic Frame Sliders are mounted with factory-designed metal brackets
• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle but will not prevent all types of damage

Stylish and rugged water-resistant nylon construction with reinforced moulded foam body and zippered lids to hold shape even when empty

• 11 litres per side capacity
• Reflective piping
• 19" Long X 6 1/2" Wide X 11" High
• Includes a set of 2 waterproof liners for packing cargo in wet weather
• Kqr or Fixed mounting system allows for easy installation of the Soft Saddlebags
• Kqr Mounting System requires Kqr Bracket Kit (99994-0523B) and Saddlebag Supports (99994-0521B), sold separately
• Fixed mounting system requires Fixed Saddlebag Support Set (99994-0819) for mounting, sold separately
• Sold as a set of 2

Strong chrome steel Passenger Backrest Frame with 330mm (13”) high riser and all required installation hardware

• Order Plain Pad (39156-0187-MA) or Studded Pad (39156-0118-MA) and Vulcan Emblem (56052-0852) separate

Taped seams and a covered zipper flap make this the perfect waterproof liner for your KQR Saddlebags

• Screen printed Kawasaki logos on both sides of each liner
• Fits KQR Saddlebags (99994-0522) or for KQR Soft Saddlebags (K5700-3121)
• Sold as a set of 2
• 483mm (19") Long X 165mm (6 1/2") Wide X 279mm (11") High

Silver resin Side Panel Set provides colour accents and contributes to functional adventure-style looks

• Required for installing 21 Litre Side Cases (99994-1490)

• 21 Litre Side Cases (99994-1490)
• 21 Litre Side Cases, Fitting Kit (99994-1492)
• 21 Litre Side Cases, One Key System (99994-1566)

Durable powder-coated steel construction Luggage Rack mounts to your Fixed Passenger Backrest (99994-0818)

• Designed by Kawasaki to enhance your Vulcan S styling while providing extra space for whatever you take with you on the road
• 203mm (8”) long x 229mm (9)” wide
• All required brackets and hardware included
• NOTE: Requires Fixed Passenger Backrest (99994-0818), sold separately

Top grain cowhide leather lid with quick-release chrome metal buckles provide essential cruiser style

• Metal reinforced frame holds shape even when empty
• Pre-drilled ABS backing plate ensures an easy installation
• Requires Saddlebag Support Kit, (K99994-0069A), sold separately

Convenient storage for touring and daily use

• Saddlebag Set and Soft Top Case feature a unique rubberized vinyl finish that is water-resistant
• Tank Bag manufactured from ballistic nylon
• Order Soft Top Case, Saddlebags, and Tank Bag separately
• Soft Top Case dimensions: 406mm (16”) L x 356mm (14”) W x 254mm (10”) H, expandable to 343mm (13 ½”) H

The ERGO-FIT reduced reach seat reduces the seat height by 15mm (5/8")

• Made to fit and complement the Ninja H2 SX motorcycle
• PVC foam with vinyl cover
• Includes all necessary hardware

Manufactured from durable ABS nylon, the functional yet stylish and compact design of these front axle sliders adds an extra level of protection to your bike, and helps guard your forks from possible tip-over damage

• With instructions and all necessary mounting hardware included, a high level of protection can be added to your bike
• Note:  Front Axle Sliders help protect your motorcycle, but will not prevent all types of damage

Help protect your vehicle’s bodywork with sturdy Kawasaki branded Frame Sliders

• Slide pads are made from polyurethane plastic for increased durability
• Dealer installation recommended
• Note: Frame sliders help protect your motorcycle, but will not prevent all types of damage

• Clear touring screen is 140 mm (6 inches) wider and 90 mm (3.5 inches) taller than the stock windshield
• Made with optically correct polycarbonate plastic
• Central air vent enhances air management
• Kawasaki logo for a factory appearance

Side cowling guards manufactured from high-density ABS material

• Solid mount metal brackets
• Side cowling needs to be drilled for fitment
• Note:  Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Help protect your engine shrouds from tip-over damage with the Frame Slider Set

• High density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory designed metal brackets
• Replacement pads (39156-1818) available separately
• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Add even more protection with front axle sliders.

• These axle sliders help to prevent damage to your front axle, front axle nut, fork bottoms and brake callipers.
• Front Axle Sliders help protect your motorcycle, but will not prevent all types of damage

Manufactured from durable ABS nylon, the functional yet stylish and compact design of these front axle sliders adds an extra level of protection to your bike, and helps guard your forks from possible tip-over damage

• With instructions and all necessary mounting hardware included, a high level of protection can be added to your bike
• Note:  Front Axle Sliders help protect your motorcycle, but will not prevent all types of damage

Add even more protection with front axle sliders.

• These axle sliders help to prevent damage to your front axle, front axle nut, fork bottoms, and brake calipers.
• This product helps to protect your motorcycle, but will not prevent all types of damage.

Side cowling guards manufactured from high-density ABS material

• The Frame Slider Set features solid mount metal brackets
• Note:  Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Protect your vehicle’s bodywork with sturdy Kawasaki branded Frame Sliders

• Slide pads are made from polyurethane plastic for increased durability
• Chassis mounted brackets have been factory tested and approved for optimal dispersion of impact during vehicle tip-overs

Tank pads (side). Top-quality gel-resin self-adhesive tank protector.

• Semi-transparent allowing the original tank colour to show through.

Help protect your engine shrouds from tip-over damage

• High density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory designed metal brackets
• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Stylish black smoked deflector adds style to your Vulcan S for around-town cruising

• Quantum hard coating protects against scratching
• Requires Fixed Windshield Fork Bracket Kit (99994-0824) sold separately
• Café Deflector is standard on 2017-2022 Vulcan S Café Edition

Clear touring screen made with optically correct polycarbonate plastic for improved visibility and Quantum hard coating to protect against scratching

• 360 mm (14 inch) tall
• NOTE: Requires Fixed Windshield Bracket Kit (99994-0825) and Fixed Fork Bracket Kit (99994-0824) sold separately
• NOTE: 2017-2021 Vulcan S Cafe Edition does not require 99994-0824 (already installed on unit)

Keep your personal items safe and secure in 47 spacious litres of lockable waterproof storage, enough room for two full-face helmets

• Durable ABS construction, Kawasaki logos, and factory-matched paint give your bike a customised look
• Easy to remove and install without tools, with a quick-release base so you can be ready for any adventure the road brings 
• 47 litre storage capacity
• Top Case load limit is 5kg.
• On the Ninja 1000 and Ninja 1000SX, KQR 47 Litre Top Case (99994-0899) is not compatible with KQR 28 Liter Panniers (99994-0564 - Ninja 1000) (99994-0568/99994-1563 - Ninja 1000SX)
• Note: Requires model-specific mounting bracket base or carrier plate. Colour panel and center panel also required and sold separately
• Note: Authorized Kawasaki dealer installation required.

• Not Compatible With Kqr Panniers

The ERGO-FIT reduced reach handlebar increases the rise by 20mm (3/4) over the stock handlebar

Help protect your engine from tip-over damage

• High-density black ABS plastic Frame Slider Set features the Kawasaki logo and is mounted with factory designed metal brackets
• Includes required brackets, hardware, and installation instructions
• Note: Frame sliders help protect your motorcycle, but will not prevent all types of damage

Help protect your engine shrouds from tip-over damage

• Side cowling guards manufactured from high-density molded nylon
• Solid mount metal brackets
• Note: Frame sliders help protect your motorcycle, but will not prevent all types of damage

Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking

• Note: Authorized Kawasaki dealer installation required

Charge your portable devices on the go with this 12-volt DC Power Outlet

• Dealer installation recommended
• Requires Relay Kit (99994-1040), sold separately

The Passenger Seat has a wide, flat surface to ensure comfort

• The seat comes fully assembled and utilizes stock mounting hardware
• Features an embossed Ninja logo
• Designed to complement the Comfort Seat (99994-1875) or the ERGO-FIT reduced reach seat (99994-1268), sold separately

Manufactured from durable ABS nylon, the functional yet stylish and compact design of these front axle sliders adds an extra level of protection to your bike, and helps guard your forks from possible tip-over damage

• With instructions and all necessary mounting hardware included, a high level of protection can be added to your bike in a matter of minutes
• Note:  Front Axle Sliders help protect your motorcycle, but will not prevent all types of damage

Lock your helmet securely and conveniently when you’re off the road

• Chassis mounted lock utilises the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Steel construction
• All required brackets and hardware included
• Authorised Kawasaki dealer installation required

This center stand mounts permanently to the motorcycle

• Helps streamline cleaning and maintenance
• Includes all required hardware
• Standard equipment on some Ninja H2 SX motorcycle models

Manufactured from durable ABS nylon, the functional yet stylish and compact design of these front axle sliders adds an extra level of protection to your bike, and helps guard your forks from possible tip-over damage

• With instructions and all necessary mounting hardware included, a high level of protection can be added to your bike in a matter of minutes
• Note:  Front Axle Sliders help protect your motorcycle, but will not prevent all types of damage

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip

• Adjust to low, medium, or high settings with the touch of a button
• Indicator light on the left grip improves setting visibility
• Grip Heater Set with all required wiring, brackets and hardware
• Dealer installation recommended

Lock your helmet securely and conveniently when you’re off the road

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• NOTE: Authorized Kawasaki dealer installation required

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip

• Adjust to low, medium, or high settings with the touch of a button
• Indicator light on the left grip improves setting visibility
• Grip Heater Set with all required wiring, brackets and hardware
• Dealer installation recommended

Required for installing Top Case with internal cut key.  Check key design. 

• Additional items required for installation and/or use of this product.

Prevent tip-over damage to your front axle, axle nut, fork bottoms and brake calipers

• Manufactured from high density ABS plastic
• Functional yet stylish and compact design
• Includes required brackets, hardware and installation instructions
• Note: Front Axle Sliders help protect your motorcycle but will not prevent all types of damage

Give your passenger additional comfort with this classic style Passenger Grab Bar

• Made from durable chrome plated steel
• Includes all required hardware
• Not compatible with the Side Grip Set (99994-1546)

Give your passenger additional comfort with this classic style Passenger Grab Bar

• Made from durable black steel
• Includes all required hardware
• Not compatible with the Side Grip Set (99994-1556)

Made from durable chrome plated steel

• Includes all required hardware
• Not intended for passenger use while riding
• Not compatible with the Passenger Grab Bar (99994-1544)

Lock your helmet securely and conveniently when you’re off the road

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Steel construction
• All required brackets and hardware included
• Authorized Kawasaki dealer installation required

Screen protector for your digital dashboard

• Will protect the screen against scratches

Prevent tip-over damage to your front axle, axle nut, fork bottoms and brake calipers

• Manufactured from high density ABS plastic
• Functional yet stylish and compact design
• Includes required brackets, hardware and installation instructions
• NOTE: Front Axle Sliders help protect your motorcycle but will not prevent all types of damage

Help protect your engine shrouds from tip-over damage

• High density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory designed metal brackets
• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Help protect your vehicle’s bodywork with this sturdy Kawasaki branded Frame Slider Set

• Slide pads are made from polyurethane plastic for increased durability
• Chassis mounted brackets have been factory tested and approved for dispersion of impact during vehicle tip-overs
• Dealer installation recommended
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Help protect your engine from tip-over damage

• High-density black ABS plastic Frame Slider Set features the Kawasaki logo and is mounted with factory designed metal brackets
• Includes required brackets, hardware and installation instructions
• Note: Frame sliders help protect your motorcycle, but will not prevent all types of damage

Help protect your engine shrouds from tip-over damage

• High density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory designed metal brackets
• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

Mounting brackets attach quickly and easily to the fork tubes

• Stylish light tint polycarbonate shield measures 18" (45.7 cm) wide

Install a horn to alert others of your presence while on the job site or the trail

• Mounts internally
• Includes switch

Limited Quantities
Conveniently lock your helmet when you’re off the road with a helmet lock

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Steel construction
• Dealer installation required

Lock your helmet securely and conveniently when you’re off the road

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Note: Authorized Kawasaki dealer installation required

Store your personal items in 17 litres of lockable waterproof storage

• Enough room for all your necessary gear
• Rugged styling to complement the aggressive design of your Kawasaki
• Utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Individual pannier dimensions: 457mm (18 inches) L x 203mm (8 inches) W x 279mm (11 inches) H with 17 litre storage capacity
• 3kg (7 lbs.) max carrying capacity per side
• Polypropylene plastic
• Authorized Kawasaki dealer installation required
• Improper installation may void the accessory warranty
• Not compatible with 30 Liter Top Case (232LUU-0008 or 99994-0937)

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip

• Adjust to low, medium, or high settings with the touch of a button
• Indicator light on the left grip improves setting visibility
• Grip Heater Set with all required wiring, brackets and hardware
• Dealer installation recommended

Durable tubular steel black finish construction with bright aluminium center plate mounts securely to the rear chassis

• Provides (6.5 pound) 3.0 Kg cargo capacity
• Rack dimensions approximately 10" x 10"
• Includes four welded bungee hooks

Give your passenger additional comfort with this classic style passenger grab bar

• Made from durable chrome plated steel
• Includes all required mounting hardware
• Not compatible with Luggage Rack (99994-1448)

Stylish Hook can be used as a bungie cord attachment point

• Set includes 2 hook nuts

ERGO-FIT reduced reach seat reduces the seat height 15mm (5/8 inch)

• Made to tailor fit and compliment the Ninja H2 SX
• Includes all necessary hardware

This center stand mounts permanently to your motorcyce

• Includes all required hardware

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimise added bulk to the grip

• Adjust to low, medium, or high settings with the touch of a button
• Indicator light on the left grip improves setting visibility
• Grip Heater Set with all required wiring, brackets, and hardware
• Dealer installation recommended

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip

• Adjust to low, medium, or high settings with the touch of a button
• Indicator light on the left grip improves setting visibility
• Grip Heater Set with all required wiring, brackets, and hardware
• Dealer installation recommended

100% waterproof PVC tarpaulin with electronically welded seams

• Watertight roll-top closure with self-fastening and quick release straps
• Removable internal stiffeners help the bag hold its shape
• Air purge valve for ease of packing (compression)
• Four quick-release web-loop straps for universal attachment
• Reflective accents (strips) for better visibility
• Dimensions: 16" L x 8" W x 13.5" H
• Capacity: Approximately 22 Litres

The interchangeable  ERGO-FIT extended reach seat moves hip support back 25mm (1”) to suit most riders 6’1” and taller

• Made to tailor fit and complement the Vulcan S motorcycle, this seat will help riders find the right reach to the ground while keeping things comfortable
• Gel insert evens out seating pressure and requires no break-in
• PVC foam with vinyl cover
• Not compatible with Passenger Seat (99994-0569)

Breathable 600 denier Sur Last fabric with softened interior surface, the Premium Motorcycle Cover offers the excellent protection for your motorcycle

• This cover features heat shields in exhaust areas and metallic silk-screened logos
• Cover will not fit motorcycles with saddlebags attached

Durable, scratch-resistant material and bubble-shaped windshield offers a great look 30mm of additional wind protection

• Note: Ninja decal 56054-1088, on stock windshield can be ordered separately

This kit has all you need to be able to fit the Medium KQR windshield.

• KQR medium windshield, Part # (99994-0633)
• KQR bracket, Part # (99994-0526B)
• KQR Windshield Fork Leg Bracket (99994-0546)

Clear touring screen made with optically correct polycarbonate plastic for improved visibility and Quantum hard coating to protect against scratching

• KQR mounting system allows for easy installation or removal once installed
• 360 mm (14 inch) tall
• NOTE: Requires KQR Mounting Bracket Kit (99994-0526B) and KQR Fork Bracket Kit (99994-0546) sold separately
• NOTE: 2016 Vulcan S Cafe Edition does not require 99994-0546 (already installed on unit)

Lock your helmet securely and conveniently when you’re off the road

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Note: Authorized Kawasaki dealer installation required

Padded Fixed Passenger Backrest provides passenger comfort

• Powder-coated steel construction
• 203mm (8") tall from the seat surface
• Designed to mount optional Fixed Luggage Rack (99994-0846), sold separately

Clear touring screen made with optically correct polycarbonate plastic for improved visibility and Quantum hard coating to protect against scratching

• 435 mm (17 1/4 inch) tall
• NOTE: Requires Fixed Windshield Bracket Kit (99994-0825) and Fixed Fork Bracket Kit (99994-0824) sold separately
• NOTE: 2017-2021 Vulcan S Cafe Edition does not require 99994-0824 (already installed on unit)

Kawasaki Quick Release (KQR) 28 Litre Panniers offer a multitude of design features that add to the functionality, fitment, and usability of the pannier system. The KQR Pannier Kit also adds the ultimate versatility and touring capability to your Kawasaki vehicle. Integrated fitment, one key system, and sleek design, are sure to enhance your ride.
To complete the KQR 28 Litre Pannier Kit the following items are required:
KQR 28 Litre Hard Pannier Set – 99994-0922
Fitting Kit - Versys 650 - (99994-0537) - Ninja H2 SX - (99994-1125)  - Ninja 1000SX - (99994-0867)
Check with your dealership for the correct fitting kit
Colour Panel Set – All available colour-matched options are listed in the Bags, Luggage section.
Trim Set – All available colour-matched options are listed in the Bags, Luggage section.
Lock Cylinder Set – (99994-0407) (External cut keys)
Lock Cylinder Set - Internal cut keys (99994-1566)

• KQR Panniers click on and off your motorcycle in seconds, no tools are required
• Integrated mounting system leaves behind no unsightly brackets when panniers are removed
• Transition between full touring functionality and sport styling with ease
• One Key System - Pannier locks utilise your vehicles ignition key
• Large enough to fit all your necessary gear; including most full faced helmets
• Sleek modern styling matches the aggressive design of your Kawasaki
• Colour matched panels and trim perfectly match your vehicle paint
• Exclusive Kawasaki logo
• Waterproof to protect contents from unfavourable weather
• Internal straps keep gear secure during your ride
• Optional pannier liners sold separately (100LUU-0004)
• Individual saddlebag dimensions 305mm (12") W x 432mm (17") H x 483mm (19") L
• Note: For the Ninja 1000SX - Not compatible with KQR 47 Litre Top Case (99994-0899)
• Note: This accessory must be installed by an authorized Kawasaki Dealer. 
• Improper installation may void the vehicle and/or accessory warranty

This Knee Pad Set for the Z400 helps protect your tank’s paint finish from scratches and ordinary wear and tear

• Made with textured non-slip vinyl

Help protect your engine shrouds from tip-over damage

• High density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory designed metal brackets
• Includes required brackets, hardware, and installation instructions
• Note: Frame Sliders help protect your motorcycle, but will not prevent all types of damage

The ERGO-FIT reduced reach handlebar decreases reach by 25mm (1") to suit most riders 5’6” and under

• Made to tailor fit and complement the Vulcan S, this accessory handlebar combined with the standard adjustable clutch and brake levers allows riders to find a comfortable reach
• Handlebar, cable ties, and pre-installed left grip included

Rugged polyethylene shell with lining

• Accommodates left and right hand bolts
• Accepts 50mm scopes
• Use with Kolpin Gun Boot IV Mounts only

High strength polyethylene material cargo box with UV stabilizers to fight against fading

• Rubber sealed lid to keep out dust and water
• Two lockable latches
• Bolts in place
• Front dimensions: 864mm (34”) L x 457mm (18”) W x 178mm (7”) H
• Black

Storage space is always a premium, especially when on the trail or at the job site.

• Add additional storage securely and out of sight with this easy-to-access Under Seat Storage Bin
• Mounts under front bench seat
• Polyethylene construction
• Matching snap-on lid
• Storage Bin removes easily for cleaning once installed
• 28 litre storage capacity

Help improve your visibility during a storm or clear debris off the windshield with our automotive style Windshield Wiper

• The kit mounts to the upper center portion of your windshield
• Switch operated
• Features a 110° sweep radius
• 20” black flex blade
• Windshield Washer (KAF080-024) recommended but not required
• For use on glass windshield only
• MULE Pro-FXT/DXT - Hard Cab Enclosure (KAF080-003) and related components required
• MULE Pro-FX/DX - Hard Cab Enclosure (KAF080-060) and related components required
• Also requires Full Windshield - Glass (KAF080-041 or 99994-1392), Front Accessory Harness (KAF080-043) and Accessory Fuse Box (99994-1082) (18-20) or (KAF080-076) (15-17)

Add storage within your vehicle’s cargo bed

• Quickly attaches to either cargo bed rail
• Ample internal storage space for transporting tools, equipment, straps, tie-downs, emergency kits, trail snacks, etc.
• KQR Cargo Box measures 356mm (14”) L x 356mm (14”) W x 432mm (17”) H
• Material: Molded LDPE black plastic
• Includes internal tool tray
• Requires qty. 2 KQR Accessories Mounts (KAF080-012) sold separately

These 4.7mm (3/16”) extra thick rubber mats have been molded for a perfect fit

• Mounts directly to the floorboard
• Extra thick rubber helps reduce sound levels caused from vibration

These 4.7mm (3/16”) extra thick rubber mats have been molded for a perfect fit

• Mounts directly to the floorboard
• Extra thick rubber helps reduce sound levels caused from vibration

Roto molded PE plastic panel designed to fit perfectly in the slots of the MULE PRO-FXT bed sides in multiple configurations

• Kit includes one panel that divides the bed into two sections for convenient loading
• Additional kits can be added to further divide the cargo bed

The Hard Cab Enclosure helps provide in-cabin comfort and occupant protection from the weather

Order on demand

• Constructed of double wall TPO plastic with a steel framework
• Two large fresh air vents on top portion of rear window of cab to help increase ventilation
• Each door features automotive style lockable latches, sliding safety-glass side windows, and built-in mesh storage compartments for storage of small items. Doors are sold separately in sets of two.
• Hard Cab Enclosure required components include Hard Cab Enclosure Roof (KAF080-060), Hard Cab Enclosure Rear Panel (KAF080-061), Hard Cab Enclosure Doors (KAF080-062), and KQR Full Windshield, Glass (KAF080-041) or KQR Full Windshield, Plastic (KAF080-001) all sold separately. Optional cab components such as Heavy-Duty Springs (99994-0514), Side Mirrors (KAF080-014), Windshield Washer (KAF080-024), Windshield Wiper (KAF080-011), Accessory Fuse Box (KAF080-042), Front Accessory Harness (KAF080-043), and Rear Accessory Harness (KAF080-044) are also sold separately
• Windshield Washer (KAF080-024) and Windshield Wiper (KAF080-011) all sold separately.

Protect your cargo bed base with this tough 4.7mm (3/16") extra thick rubber mat

• Extra thick rubber helps prevent cargo from sliding
• Reduces sound levels caused from vibration
• 4.7mm (3/16") thick black molded rubber

Discontinued
The Hard Cab Enclosure Door Set integrates into the ROPS for an OEM appearance

• Steel doors with powder coated finish
• Sliding upper windows are removable without tools for extra ventilation
• Additional lower window for added visibility
• Gas strut to help hold door in open position
• Complete Hard Cab Enclosure requires Plastic Roof (99994-1157), Hard Cab Enclosure Door Set (99994-1162), KQR Rear Panel, Polycarbonate (99994-1156) and KQR Full Windshield, Glass (99994-1155)
• Not compatible with KQR Full Plastic Windshield (99994-1154)

This fully integrated system dramatically improves in-cabin comfort during those cold mornings and long winters.

• Utilises the heat generated from your engines liquid cooling system
• Distributes hot air throughout the cabin via two adjustable automotive style dash vents and one floor vent
• Dash vents can be used to eliminate condensation or clear frost from your windshield
• 2-speed blower
• 22,000 BTU
• Durable textured black powder coating
• Can be used alone or as an optional component of the Hard Cab or Soft Cab Enclosures
• Installation of Heater is recommended prior to installation of Hard or soft Cab Enclosure

• 403mm (15.875 inch) Flex Blade
• 110° sweep
• Adjustable blade operating height
• For use on KQR Full Glass Windshield (99994-1155) only
• Will not work on polycarbonate windshields
• Recommended installation of Windshield Wiper prior to installation of Hard Cab Enclosure or Soft Cab Enclosure

Front Floor Mat Set is made from tough 8mm (5/16”) extra thick rubber

• Helps reduce sound levels
• Teryx4 logo in center of mat

Rear Floor Mat Set is made from tough 8mm (5/16”) extra-thick rubber

• Helps reduce sound levels
• Teryx4 logo in center of mat

3D curved safety glass provides increased field of view

• Textured black powder coating
• Cast aluminium mounting that works with 38.1mm (1.5 inch) to 45mm (1 7/8 inch) diameter tubes
• 273mm (10 3/4 inch) L x 89mm (3.5 inch) H

Plastic tank holds cleaning solution

• Pumps washing fluid to hood mounted nozzle
• Helps to remove fluid and residue from glass windshield
• Not for use on polycarbonate windshields
• Requires windshield Wiper (99994-1164), sold separately
• Installation of Windshield Washer is recommended prior to installation of Hard Cab Enclosure or Soft Cab Enclosure

2-speed wiper features 483mm (19) silicon flex blade

• Silicon blade aids in use with polycarbonate windshield
• 135° sweep
• Adjustable blade operating height
• Washer features custom-formed 1.89 liter (½ gallon) plastic container and pumps fluid to an adjustable nozzle
• Wiper removes fluid and residue
• Use on KQR Full Windshield, Glass (99994-1290) or KQR Full Windshield, Polycarbonate (99994-1289)

The Soft Upper Door Set can be installed or removed when necessary

• 600 Denier Sur Last water-resistant Upper Door Set attaches to stock doors and is held closed with the existing door latching system
• Large side windows offer additional light and unzip for added ventilation when desired
• Seals to ROPS
• Provisions included for side mirror installation
• Creates a full enclosure when combined with the KQR Full Windshield, Polycarbonate (99994-1289), KQR Full Windshield, Glass  (99994-1290), Soft Rear Panel (99994-1297) or  KQR Rear Panel, Polycarbonate (99994-1294), and choice of roof, Soft Roof (99994-1296) use with KQR Full Windshield, Polycarbonate Only,  KQR Sport Roof (99994-1293).

This fully integrated heater system dramatically improves in-cabin comfort during those cold mornings and long winters

• Utilises the heat generated from your engine’s liquid cooling system
• Distributes warm air throughout the cabin via two adjustable automotive-style dash vents, two face vents, and two floor vents
• Defrost vents can be used to eliminate condensation or clear frost from your windshield
• 3-speed blower with temperature control and automatic shut-off
• Features blow-molded ducting for an OEM appearance
• Can be used as a cabin fan during the summer months

Help protect your drivetrain and chassis with a durable three-piece HMW (High-Molecular Weight) Kawasaki Genuine Skid Plate Set

• Constructed of 9.525mm (3/8”) thick HMW these skid plates help provide additional protection to your investment’s underbody
• Designed to help provide additional underbody protection

3D curved safety glass provides increased field of view

• Push button, removable LED light under mirror offers additional in-cabin light
• Textured black powder coating
• Cast aluminium mounting works with 38.1mm (1 ½”) to 45mm (1 7/8”) diameter tubes
• 445.8mm (18”) L x 78.7mm (3 1/10”) H

This fully integrated system dramatically improves in-cabin comfort during those cold mornings and long winters.

• Utilizes the heat generated from your engines liquid cooling system
• Recirculates air throughout the cabin by two lower vents and four upper vents
• The system also features a windshield defroster vent to eliminate condensation or clear frost from your windshield
• 4-speed blower
• 22,000 BTU
• Durable textured black powder coating

• Can be used alone or as an optional component of the Hard Cab Enclosure (99994-1393/KAF080-003 or KAF080-060/99994-1407 and KAF080-061) or Soft Cab Enclosure (KAF080-015, KAF080-046, KAF080-067 or KAF080-069)
• Requires Accessory Fuse Box KAF080-042/KAF080-076 (2015-2017) or 99994-1082 (2018-2022), sold separately
• Note: Must Be Installed Prior To Hard Cab Enclosure

Durable black ABS plastic construction

• Helps provide scuff protection for the chassis side rails
• All hardware and instructions included

Coil springs replace standard rear spring

• Sold individually; 2 required.  
• Required component for the Hard Cab

The Heavy-Duty Spring Set increases bottoming resistance when carrying a heavy load and/or when heavy accessories such as a Kawasaki Genuine Cab Enclosure System are installed

• Required when Kawasaki Genuine Cab Enclosure System are installed
• Steel springs with gloss black finish
• Two front springs and two rear springs included
• Direct replacement of stock springs
• Front spring rate 47 N/mm and Rear spring rate 80 N/mm
• 35% stiffer than stock springs
• Sold as a set of 4

Freight charge not included in the price shown, contact your dealer. One-piece scratch-resistant polycarbonate KQR Flip-Up Windshield with three position latching (closed, vented and open) increases air flow

• Digital gradient border in silk screen adds stylish accent
• KQR mounting system allows for efficient installation and removal
• Windshield can be used alone, with all roofs in the collection of Kawasaki Genuine Accessories or as part of a complete Soft Cab Enclosure
• Do not operate the vehicle with the windshield in the full open position

600 Denier Sur Last water-resistant material easily attaches to vehicle with quick release buckles and hook-and-loop straps

• Creates a full enclosure when combined with the Soft Cab Enclosure, Back (99994-1160) or KQR Rear Panel, Polycarbonate (99994-1156), and Soft Cab Enclosure, Upper Door Set (99994-1161) and one of two windshields:  KQR Full Plastic Windshield (99994-1154) or KQR Full Glass Windshield (99994-1155)
• Soft Cab Enclosure, Roof does not require Soft Cab Enclosure, Upper Door Set but should be used in combination with a windshield

600 Denier Sur Last water-resistant material easily attaches to vehicle with quick release buckles and hook-and-loop straps

• Large rear window zips open for increased airflow
• Creates a full enclosure when combined with the Soft Cab Enclosure, Plastic Roof and Soft Cab Enclosure, Upper Door Set (99994-1161) and one of two windshields:  KQR Full Fixed Windshield, Polycarbonate (99994-1154) or KQR Full Windshield, Glass (99994-1155)
• Soft Cab Enclosure Back does not require Soft Cab Enclosure Upper Door Set but should be used in combination with a windshield and roof

The Soft Cab Enclosure, Upper Door Set can be installed or removed to suit changing weather conditions

• 600 Denier Sur Last water-resistant Upper Door Set attaches to stock doors and is held closed with the existing door latching system
• Large side windows offer additional light and unzip for added ventilation when desired
• Seals to ROPS
• Creates a full enclosure when combined with the Plastic Roof, Soft Cab Enclosure, Back (99994-1160) and one of two windshields: KQR Full Plastic Windshield (99994-1154) or KQR Full Glass Windshield (99994-1155)

Horizontal shatter-resistant safety glass mirror sits in cast aluminum armored housing

• Convex mirror surface doubles the driver’s field or rear view
• Adaptive 360 deg. bracket rotation provides optimal viewing position
• An enclosed floating mirror mount helps adjust and protect the mirror within its housing
• Kawasaki logos are embossed on the seal cap and back
• Cap is weather sealed to help protect the hardware from moisture and debris
• Mirrors attach directly to vehicle ROPS

Each Hard Cab Enclosure, Rear Door Set features automotive style lockable latches, sliding safety glass side windows, and built-in mesh storage compartments for storage of small items

• Front Door Set (KAF080-004) and Rear Door Set (KAF080-005), sold separately
• Hard Cab Enclosure Roof and Frame (KAF080-003) required, sold separately

Installation of the water resistant Soft Cab Enclosure does not impact ease of vehicle transformation

• Doors offered as a set of 4 in black (KAF080-016) 
• Doors securely fasten to the existing bodywork and are held closed with a unique magnet latching system
• Large side windows offer additional interior light and unzip for added ventilation
• Requires KQR Full Windshield, Plastic (KAF080-001) and Soft Cab Enclosure, Roof and Back, Black (KAF080-015), sold separately, to complete Cab Enclosure system
• Not compatible with Side Mirror Set, Standard (99994-0855) or Side Mirror Set, Premium (99994-0856)

The Soft Cab Enclosure Door Set securely fastens to the existing bodywork, is held closed with a unique magnet latching system, and must be attached to Soft Cab Enclosure

• Large side windows offer additional light and unzip for added ventilation
• Doors are offered as a set of two
• Not for individual use; for use only with Complete Soft Cab Enclosure
• Requires KQR Fixed Polycarbonate Windshield (KAF080-001) and Soft Cab Enclosure, Roof and Back, Black (KAF080-067), sold separately, to complete Cab Enclosure system

One of our most popular accessories for a good reason

• This stylish Soft Roof seamlessly installs for full overhead coverage and weather protection on the trail
• Made from 600 denier Sur Last water-resistant fabric
• Available in black 
• Tightly straps to the vehicle Roll Over Protective Structure (ROPS) for an integrated fit
• Compatible with KQR Half Windshield (KAF080-027), KQR Full Windshield, Plastic (KAF080-001), or Flip-Up Windshield, Polycarbonate (99994-0753)

Provides top cover supported by fiberglass rods

• Large flexible acrylic window extends behind uprights to bottom of seat
• Provides cover from back side
• Produced from nylon reinforced rip-stop vinyl
• Use alone or with windshield

600 denier Sur Last water resistant material with a tubular aluminium framework provides full protection from the elements

• Half doors (TX000-10 or TX000-12, sold separately) solid mount to lower door and feature unique magnetic latches that attach to ROPS
• Use with Full Windshield (TX750-057A or TX000-20), sold separately
• Note: Not compatible with KQR Full Polycarbonate Windshield (99994-1520) or Soft Cab Enclosure Door Set, Black (99994-1609)

600 Denier Sur Last water-resistant material with a tubular aluminium framework helps provide protection from the elements

• Half doors solid mount to lower door and feature unique magnetic latches that attach to ROPS
• Requires Soft Cab Enclosure, Roof and Back (TX000-05) and Full Windshield (TX000-20 or TX750-057A), sold separately
• Note: Not compatible with KQR Full Polycarbonate Windshield (99994-1520) or Soft Cab Enclosure Roof and Back, Black (99994-1608)

600 Denier Sur Last water resistant material with a tubular aluminium framework provides full protection from the elements

• Half doors solid mount to lower door and feature unique magnetic latches that attach to ROPS
• Requires Soft Cab Enclosure, Roof and Back (TX750-059A) and Full Windshield (TX000-20 or TX750-057A), sold separately
• Note: Not compatible with KQR Full Polycarbonate Windshield (99994-1520)
• Remove for towing or use an enclosed trailer when transporting a vehicle with a Soft Cab Enclosure

600 Denier Sur Last water resistant material with a tubular aluminium framework provides full protection from the elements

• Half doors solid mount to lower door and feature unique magnetic latches that attach to ROPS
• Remove for towing or use an enclosed trailer when transporting a vehicle with a Soft Cab Enclosure

Offered as a set of two, automotive-style soft doors come with magnetic latching

• Doors securely fasten to the existing bodywork and side windows offer additional light and unzip for added ventilation
• Complete Soft Cab Enclosure requires Roof and Back (99994-0850), Doors (99994-0911) and the choice of two windshields:  KQR Flip-Up Windshield (99994-0853) or KQR Full
• Windshield (99994-0852)
• Not for individual use; for use only as component of Soft Cab Enclosure
• Remove for towing or use an enclosed trailer when transporting a vehicle with Soft Cab Enclosure Doors

The Enter/Exit Grab Handle facilitates entry and exit, especially with windshields or cabs installed 2 Shown, sold individually

• Heavy-duty soft-radius plastic handle
• Universally mount on driver or passenger side

Molded rubber Dash Net with Anti-Slip Tray helps to keep your phone and other valuables contained in the center storage bin

• Dash Net not compatible with Audio System (99994-1299) center console but Anti-Slip Tray works for both

Limited Quantities
Keep your cans cool

• 5mm Neoprene outer layer.
• Attractive Kawasaki branding and graphic
• Shark skin base
• Overlocked edging for durability
• Cool graphic print
• Gift boxed

High strength polyethylene material cargo box with UV stabilizers to fight against fading

• Rubber sealed lid to keep out dust and water
• Two lockable latches
• Bolts in place
• Rear dimensions: 1,016mm (40”) L x 559mm (22”) W x 305mm (12”) H
• Black polyethylene

When on the trail or job site, additional storage for essential tools and equipment is important.Add additional easy-access storage to your Mule Pro series side by side with the Front Rack

• Mounts to Brush Guard and the ROPS
• Black powder-coated steel construction
• Tilts forward for easy access to the hood
• Multiple tie-down points
• Requires Brush Guard (99994-0412), sold separately
• Not compatible with Hard Cab Enclosures, Soft Cab Enclosures, or  Flip-Up Polycarbonate Windshield (99994-0753)

Extend your usable cargo space by 203mm (8”) with this durable roto-molded plastic Bed Extender

• Simply lower the tailgate and attach the extender to the bed rails with two KQR Accessory Mounts
• Easily adjust to different cargo sizes by sliding the clamps forward or backward or reverse the entire Bed Extender to create a divider
• Two KQR Accessory Mounts included

The Cabin Fan increases airflow within the Hard Cab Enclosure by drawing in outside air

• Mounts to top of Hard Cab Enclosure Roof
• Conveniently operated by dash-mounted switch
• Dealer installation recommended
• Hard Cab Enclosure and related components required
• Also requires Accessory Fuse Box (KAF080-042 / KAF080-076) (2015-2017) or (99994-1082) (2018-2022) and Front Accessory Harness (KAF080-043)

The Hard Cab Enclosure helps provide in-cabin comfort and occupant protection from the weather

• Two large fresh air vents on top portion of rear window of cab to help increase ventilation
• Hard Cab Enclosure required components include Hard Cab Enclosure Roof (KAF080-060/99994-1407), Hard Cab Enclosure Rear Panel (KAF080-061), Hard Cab Enclosure Doors (KAF080-062), choice of windshield KQR Full Glass Windshield (KAF080-041/99994-1392), KQR Full Plastic Windshield (KAF080-001), or Flip-Up Polycarbonate Windshield (99994-0753) and Heavy-Duty Spring Set (99994-0514), all sold separately
• Windshield Washer (KAF080-024) and Windshield Wiper (KAF080-011) not compatible with KQR Full Plastic Windshield (KAF080-001) or Flip-Up Polycarbonate Windshield (99994-0753)

The Brush Guard is made from 38mm (1 ½”) steel tubing with 2.1mm (.083”) wall thickness for super tough protection

• Four widely separated mount points for extreme rigidity
• Does not interfere with winch mounting or use
• Self-locking hardware

The Flip-Up Windshield features a seamless one-piece design

• Allows full opening of storage compartment
• Strong and attractive domed shape
• Two-position latching - fully closed and vented
• Can be used alone, with a roof or as a component of the Soft Cab Enclosure (KAF600-038)
• Operating assist with gas springs
• Remove for towing or use an enclosed trailer when transporting a vehicle with a Flip-Up Windshield installed at speeds greater than 40 kph

Lockable moulded plastic KQR Cargo Box features a double wall, insulated lid

• Installs with convenient KQR aluminium clamps (included) that attach to the cargo bed rail
• Measures 432mm 17” L x 43mm (19”) W x 457mm (18”) H

The Cargo Bed Mat is made from tough extra thick rubber that helps protect bed floor

• Reduces sound levels
• Prevents cargo from sliding

This KQR Gun Mount allows for secure, convenient weapon storage within the bed of your MULE

• Securely fastens Gun Defender
• Designed to allow for ergonomic gun loading angle while maximizing the bed space below
• Can hold two Kawasaki Gun Defenders by ATV/UTV TEK
• Quickly attaches to the rails of the vehicle’s cargo bed using KQR clamps
• Powder coated black
• Kawasaki Gun Defender (99994-1204) sold separately
• Requires two KQR Accessories Mounts (KAF080-012), sold separately

Heavy-Duty Springs increase bottoming resistance when carrying a heavy load and/or when heavy accessories such as a Kawasaki Genuine Cab Enclosure or Plow System are installed.

• Steel springs with gloss black finish
• Two front springs included
• Note: Direct replacement of stock springs

Roto-moulder PE plastick panels disigned to fit perfectly in the slots of the Teryx side x side bed sides in multiple configurations.

• Cargo Bed Divider kit includes two panels that divide the bed into four sections for convenient loading
• Additional kits can be added to further divide the cargo bed

Injection molded design offers superior strength as well as high water and dust resistance

• Defender design accommodates standard length and longer rifle barrels
• Additional width in the right places eliminates interference with bolts and target style turrets
• Fully customizable hybrid interior structure ensures a secure hold and protection for any gun
• 1 1/4 inch receiver slider makes for easy on, and easy off of the machine

Tough extra thick rubber protects bed floor.

• Reduces sound levels.
• Prevents cargo from sliding.

Durable, lockable molded plastic cargo box features a double-wall, insulated lid that rides on a gas shock for ease of use.

• Includes one cooler box that locks into a channel and still leaves room underneath for additional storage.
• Additional cooler boxes can be purchased separately (TX750-072).
• Simple installation with 4 thumb screws that re-use the original tie-down hooks inside the cargo box.

Pivoting Rear Cargo/Tyre Rack allows for spare tire mounting or additional cargo space

• One-handed latch release for easy access to the cargo bed area
• Gas shocks support the rack in the up position
• Rear Cargo/Tyre Rack required to mount HMW (High-Molecular Weight) Cargo Rack Tray (99994-1345)

Help secure your usable cargo space with this durable roto-molded plastic KQR Tailgate

• KQR Tailgate simply slides into place and is secured with two KQR Tailgate screw handles

The Mount for Kolpin Gun Boot IV is a black tubular steel mount to carry two Gun Boots

• Does not include Gun Boots, order separately: (ATV100-004) or (028752-044275)
• Securely fastens two Gun Boots
• Attaches to the rear side of the cargo guard
• Powder-coated in black
• Note: Not Compatible with Soft Cab Enclosure, Roof and Back, Realtree Xtra Green (TX000-19) or Soft Cab Enclosure, Roof and Back, Black (TX000-05)

The Mount for Kolpin Gun Boot IV is a black tubular steel mount to carry two Gun Boots

• Does not include Gun Boots, order separately: (ATV100-004) or (028752-044275)
• Securely fastens two Gun Boots
• Attaches to the rear side of the cargo guard
• Powder-coated in black
• Note: Not Compatible with Soft Cab Enclosure, Roof and Back, Realtree Xtra Green (TX000-19) or Soft Cab Enclosure, Roof and Back, Black (TX000-05)

Freight charge not included in the price shown, contact your dealer. Durable scratch-resistant polycarbonate KQR Fixed Windshield with sliding lower vent system provides improved ventilation and cabin comfort

• Digital gradient border in silk screen adds a stylish accent
• KQR mounting system allows for efficient installation and removal
• Windshield can be used alone, with all roofs in the collection of Kawasaki Genuine Accessories or as part of a complete Soft Cab Enclosure

Enclosed in a durable black housing

• The Side Mirror Set easily installs to your Front Hard Cab Enclosure Door Set (KAF080-004) or (KAF080-062)
• Hard Cab Enclosure (KAF080-003) or (KAF080-060) and related components required

Protect your cargo bed base with these tough 4.76mm extra thick rubber mats.

• Unique two piece design does not interfere with transition from long to short bed mode.
• Extra thick rubber also prevents cargo from sliding
• Reduces sound levels caused from vibration.

The Soft Cab Enclosure, Roof and Back is made from 600 Denier Sur Last water-resistant material and helps provide protection from the elements

• Rear window zips open for increased cabin airflow
• Doors securely fasten to the existing bodywork and are held closed with a unique magnet latching system
• Large side windows offer additional light and unzip for added ventilation
• Doors are offered as a set of two black (KAF080-068), sold separately and must be attached to Soft Cab Enclosure
• Requires KQR Full Windshield, Plastic (KAF080-001), sold separately, to complete Soft Cab Enclosure system

Raise and lower your cargo bed with a hydraulic Cargo Bed Lift, saving energy and increasing productivity

• Self-contained hydraulic system; no hoses, no reservoir to fill or top off, no bleeding process
• Durable steel construction

Quickly and easily add extra storage capacity to your Teryx.

• Mounts safely and securely utilizing built-in shock cords on the cargo shelf behind the seats.
• Constructed of durable vinyl coated Prosol fabric with weather resistant zippers and a meshed outside pocket for frequently used items.
• Foam padded base and structure help keep its shape.
• Detachable shoulder strap and lightweight design makes this item extremely portable.

This KQR Mount for Koplin Gun Boot IV allows for secure, convenient weapon storage within the bed of your MULE. Securely fastens two Gun Boots. Quickly attaches to the rails of the vehicle’s cargo bed using KQR clamps. Powder coated black. 

• Gun Boot IV cases (ATV100-004 or 028752-044275) sold separately.  
• Requires two KQR Accessories Mounts (KAF080-012), sold separately.  

Raise and lower your cargo bed with a hydraulic Cargo Bed Lift.

• Self-contained hydraulic system; no hoses, no reservoir to fill or top off, no bleeding process.
• Durable steel construction.

Provides protection for engine, transmission cover and electrical cover on right side of gasoline units

Tough resilient rubber protects feet and Mule floorboards

• 5/16" extra thick rubber, Reduces sound levels
• MULE logo in center of mat

Has larger lower roller for “softer” cable flex and improved plow operation

• WARN Roller Fairlead features common 2-bolt mount pattern, 124mm (4 7/8”) hole centers
• Fits WARN winches
• Nylon roller bushings for easy rotation
• Plated rollers to resist corrosion
• Attachment bolts included

600 Denier Sur Last water-resistant material easily attaches to vehicle with quick-release buckles and hook-and-loop straps

• Large rear window zips open for increased airflow
• Creates a full enclosure when combined with the KQR Full Windshield, Polycarbonate (99994-1289), KQR Full Windshield, Glass (99994-1290), Soft Upper Door Set (99994-1298), and choice of Soft Roof (99994-1296) use with KQR Full Windshield, Polycarbonate Only,  KQR Sport Roof (99994-1293).

Purchase as a required component to mount DC Power Outlet, Gear Position Indicator, Grip Heaters, LED Light Bar or other electrical accessories

• Only one Relay Kit required per Versys motorcycle.
• Complete plug-and-play heated grip kit replaces stock grips and throttle.

Cargo Bed Liner divider notches to use 152mm (6") L x 51mm (2") W to compartmentalize bed

• Matching cover for tailgate
• Slip resistant features all of the benefits of the standard bed liner plus a treatment to increase surface friction helping to prevent cargo from sliding around

Freight charge not included in the price shown, contact your dealer. Polycarbonate windshield material helps provide protection from the elements

• KQR Full Windshield, Polycarbonate (99994-1154) can be installed or removed without tools
• Can be used with any combination of soft doors, rear panels, and roofs offered by Kawasaki
• Sliding lower vent system provides improved ventilation and cabin comfort
• Not compatible with Hard Cab Enclosure Door Set (99994-1162)
• Vehicle must be positioned in the forward facing direction when towed on open trailers

Rubber bed mat protects cargo and MULE bed surface 5/16" Extra thick flexible rubber

• Prevents cargo from sliding
• Reduces sound levels
• MULE logo in the centre of mat

Color impregnated, semi-rigid plastic

• No supports needed
• OEM component on some MULE SX models
• Use alone or with KQR Fixed Windshield (99994-0852) or KQR Flip-Up Windshield (99994-0853)
• Remove for towing or use an enclosed trailer when transporting a vehicle with a Plastic Roof installed

The Rear Bumper helps provide extra protection for the rear of the vehicle

• Made of durable 38mm (1½”) tubular steel construction with textured black powder coated finish

Durable steel tubing adds protection and style.

• Textured black powder coating matches stock bumper.
• Built-in mounting tabs for optional HID Lighting Kit TX750074A (not included).

Tough custom moulded 7.9mm (5/16 inch) extra-thick rubber matches the floor contours for a perfect fit

• Reduces sound levels
• Mule logo in the center of mats

Add protection and aggressive style to the front of your vehicle with this durable laser cut, formed steel brush guard

• Powder coated in textured black to match the stock front bumper for a uniform look
• Built-in headlight guards
• Mounting tabs for the Kawasaki Genuine LED Light Bar (KAF080-048)
• Steel 38mm (1½”) diameter tubing / 2.1mm (8/100”) wall thickness
• Does not interfere with Kawasaki Genuine Winch Mount (99994-0687)

Helps protect your drive train and chassis

• Unlike the aftermarket, each plate has been designed with precise ventilation holes and has been tested to prevent high engine temps during hard use or hot weather
• Made of 4.7mm (3/16”) thick 5052 aluminium
• Brushed aluminium finish
• Mid Skid plate (99994-0439) and rear skid plate (99994-0512) availaable 

Click-6 Complete 6-Point Harness Kit includes both driver and passenger side 6 point harness restraint systems

• Retractable shoulder straps provide improved mobility when necessary
• Belts designed to make buckling in and adjustment easy
• Factory designed and tested • Features Kawasaki branding
• Includes all mounting brackets and hardware for a complete fit
• Not compatible with Rear Pod Speaker Set (KRX65RP) sold separately

Durable1.5"steel tubing adds protection and style.

• Textured black powder coating matches the stock bumper.
• Built-in mounting fabs for optional HID Lighting Kit.

Add protection and aggressive style to the front of your vehicle with this durable laser cut, formed steel brush guard

• Black powder coating to match the stock front bumper for a uniform look
• Mounts over the stock bumper with included hardware
• Includes mounting holes for Kawasaki Genuine Headlight Guard Set (99994-1031)
• Does not interfere with Kawasaki Genuine Winch Mount

The Brush Guard is made from 38mm (11/2”) powder-coated steel for extra protection when attached to stock bumper

• Bumper comes pre-drilled for easy mounting
• Required to mount optional LED Light Bar (KAF080-048), sold separately
• Brush Guard does not interfere with winch mounting or use

Durable tubular steel construction with matching textured black powder coating

Hard coated polycarbonate windshield material helps provide protection from the elements

• Three dimensional, automotive style and a curved design
• Can be installed or removed without tools
• Screen printed border
• Use with any combination of soft doors, rear panels, and roofs offered by Kawasaki
• Compatible with Windshield Wiper/Washer Kit (99994-1295)
• Vehicle must be positioned in the forward facing direction when towed on open trailers

Freight charge not included in the price shown, contact your dealer. The KQR Full Windshield can be quickly installed or removed with minimal use of tools once installed

• Helps provide protection from wind and debris for improved in-cabin comfort
• Slim c-channel frame provides increased visibility with exceptional frame support
• Made from DOT approved AS1 safety glass
• Can be used alone or as a component of the Hard Cab Enclosure

Freight charge not included in the price shown, contact your dealer. Kawasaki Quick Release windshield with a sliding vent system which allows airflow

• Quantum hard-coated polycarbonate
• 30x More Scratch Resistant than Acrylic
• 10x More Scratch Resistant than FMR Coated Polycarbonate
• The Quantum hard-coating helps provide higher optical definition and clarity
• Note: Not compatible with Soft Cab Enclosure Roof and Back (TX000-05) and Soft Cab Enclosure Door Set (TX000-12 / TX000-16)
• Remove for towing or use an enclosed trailer when transporting a vehicle with a Full Windshield

Freight charge not included in the price shown, contact your dealer.

The KQR Full Windshield, Plastic can be installed or removed with minimal use of tools once installed

• Helps provide protection from wind and debris for improved in-cabin comfort
• Three large fresh-air vents on windshield open and close to increase airflow in cab
• Made from scratch-resistant polycarbonate
• Drilling required for center mount bracket
• Optional component of the Hard Cab Enclosure
• Required component of the Kawasaki Genuine Soft Cab Enclosures 
• Windshield Washer (KAF080-024) and Windshield Wiper (KAF080-011) not compatible with KQR Fixed Polycarbonate Windshield.

Freight charge not included in the price shown, contact your dealer. The KQR Full Glass Windshield can be quickly installed or removed with minimal use of tools once installed

• Tool-less removal when used as standalone windshield - a wrench is required for removal when used as a component of the Hard Cab Enclosure
• Helps provide protection from wind and debris for improved in-cabin comfort
• Made from DOT approved AS1 safety glass
• Vehicle must be positioned in the forward facing direction when towed on open trailers

Whether on the job site or the farm, a Back-Up Beeper is a useful addition to alert others that your vehicle is reversing

• Emits 97db
• Product meets O.S.H.A. regulations and SAE standard J994
• Black with steel housing
• Wires directly to the reverse switch on the transmission

This high quality full-width windshield is made from durable polycarbonate and provides excellent protection from wind and dust

• The flexible center portion allows easy access to front storage compartment
• Easy installation and removal with included hardware
• Can be used alone, with a roof, or as a component of the Soft Cab Enclosure (KAF600-035B)

Helps provide protection from mud, sand and debris.

• Fixed one-piece design features a hard-coated scratch resistance surface.
• Fits with all Kawasaki Genuine Accessory tops and mirrors.
• Must be removed for tansport on open trailer at speeds in excess of 80 kph.

The Half Windshield deflects airflow for a more comfortable ride at higher speeds

• One-piece design features a hard-coated scratch-resistant surface

Helps provide protection from mud, sand and debris

• Fixed one-piece design features a hard-coated scratch resistant surface
• Fits with all Kawasaki Genuine Accessory tops and mirrors

Freight charge not included in the price shown, contact your dealer.

Three-position Flip-Up Polycarbonate Windshield provides the option for a sealed windshield with the ability to flip up to let just the right amount of air into the cabin

• Closed and vented positions allow occupants to limit air flow when driving while the fully open position provides maximum airflow while stopped
• Made from 4.5mm (0.177 inch) scratch-resistant polycarbonate (hard coated)
• Installation requires no drilling

Add sealed storage within your vehicle’s cargo bed

• Up to four KQR Cargo Boxes can quickly attach to either cargo bed rail without tools once assembled
• Ample internal storage space for transporting tools, equipment, straps, tie-downs, emergency kits, trail snacks, etc…
• KQR Cargo Box measures 686mm (27 inch) L x 381mm (15 inch) W x 381mm (15 inch) H
• Molded LDPE black plastic
• Requires two KQR Accessories Mounts (KAF080-012) sold separately

Whether on the job site or the farm, a Back-Up Beeper is a useful addition to alert others that your vehicle is reversing

• Black with steel housing
• Wires directly to the reverse switch on the transmission

Extend your usable cargo space by 20cm (8 inches) approx, with this durable black powder coated steel Bed Extender/Divider

• Simply lower the tailgate and attach the extender to the bed rails with two KQR clamps
• Easily adjust to different cargo sizes by sliding the clamps forward or backward or by reversing the entire Bed Extender to create a divider
• Two KQR Accessory Mounts Required (KAF080-012) required (sold separately)

The KQR Full Windshield, Glass can be quickly installed and removed without tools

• Automotive-style frameless, three dimensional, curved design
• Helps provide protection from wind and debris for improved in-cabin comfort
• Made from DOT approved AS1 safety glass
• Printed gradient border, TERYX KRX 1000 side x side silhouette, and Kawasaki Logo add to the custom look of this windshield
• Can be used with any combination of soft doors, rear panels, and roofs offered by Kawasaki Not compatible with Soft Roof (99994-1296)
• Compatible with Windshield Wiper/Washer Kit (99994-1295)
• Vehicle must be positioned in the forward-facing direction when towed on open trailers

The Flip-Down Windshield, Polycarbonate can be quickly opened or closed when desired

• Helps provide protection from the wind for improved in-cabin comfort when closed or increased cabin ventilation when open
• Features a screen printed, three-piece design with a tinted top piece for added glare resistance
• Made from scratch-resistant hard-coated polycarbonate
• Not compatible with Windshield Wiper/Washer (99994-1295) or Soft Roof (99994-1296)
• Towable in forward-facing position only
• Flip-Down Polycarbonate Windshield must be in the closed and locked position while being towed
• Vehicle speed must be kept below 88klm when in flip-down position

The KQR Half Windshield deflects direct wind blasts while maintaining comfortable air-flow throughout

• Made from hard coated polycarbonate
• 3D formed and screen printed for a custom look and fit
• Not compatible once a Windshield Wiper/Washer Kit 99994-1295 has been installed
• Vehicle must be positioned in the forward facing direction when towed on open trailers

600 Denier Sur Last water-resistant material easily attaches to vehicle with quick-release buckles and hook-and-loop straps

• Creates a full enclosure when combined with the KQR Full Windshield, Polycarbonate (99994-1289), Soft Rear Panel (99994-1297) or  KQR Rear Panel, Polycarbonate (99994-1294), and Soft Upper Door Set (99994-1298)
• Soft Roof (99994-1296) does not require Soft Upper Door Set (99994-1298) but should be used in combination with a KQR Full Windshield, Polycarbonate (99994-1289) and Soft Rear Panel (99994-1297) or  KQR Rear Panel, Polycarbonate (99994-1294)
• Not compatible with KQR Full Windshield, Glass (99994-1290), Flip-Down Windshield, Polycarbonate (99994-1291), or Rear LED K-Glow Light Bar Installation (99994-1323)
• Towable on open trailers when used in combination with KQR Full Windshield, Polycarbonate (99994-1289), Soft Rear Panel (99994-1297) or  KQR Rear Panel, Polycarbonate (99994-1294), and the Soft Upper Door Set (99994-1298). The vehicle must be positioned in the forward-facing direction when towing.

Freight charge not included in the price shown, contact your dealer. The KQR Half Windshield deflects direct wind blasts while maintaining comfortable air-flow throughout

• 3D Formed for a custom look and fit
• Quantum hard-coated polycarbonate
• 30x More Scratch Resistant than Acrylic
• 10x More Scratch Resistant than FMR Coated Polycarbonate
• The Quantum hard-coating help provide higher optical definition and clarity
• Vehicle must be positioned in the forward-facing direction when towed on open trailers

Polycarbonate material helps provide protection from the elements

• KQR Rear Panel, Polycarbonate can be installed or removed without tools
  Can be used with any combination of windshield, doors, and roofs offered by Kawasaki for the MULE PRO-MX side x side
• Complete Cab Enclosure requires Plastic Roof, Soft Cab Enclosure Upper Door Set, Black (99994-1161), KQR Rear Panel, Polycarbonate (99994-1156) and KQR Full Windshield, Glass (99994-1155) ,KQR Fixed Polycarbonate Windshield (99994-1154)

Quantum hard-coated polycarbonate material helps provide protection from the elements

• Three-dimensionally formed, lightweight design with screened logos for added function and style
• Add a KQR Sport Roof  (99994-1293), Soft Roof (99994-1296), Soft  Upper Door Set (99994-1298), and choice of windshield KQR Full Windshield, Glass (99994-1290) or KQR Full Windshield, Polycarbonate (99994-1289) to create a complete Cab Enclosure

The Hard Cab Enclosure, Roof and Frame helps provide in-cabin comfort and occupant protection from the weather

• Constructed of black double wall TPO plastic with steel framework
• Installation of the Hard Cab Enclosure does not impact ease of vehicle transformation
• Roof tilts on gas shocks for easy access to engine
• Each door features lockable latches, sliding safety glass side windows, and built-in mesh storage compartments for storage of small items
• Front Doors and Rear Doors are sold separately in sets of two
• Clear sliding window partition between front and rear seats to allow for complete cab enclosure whether in 3 or 6 passenger mode
• Can be towed on open trailers

• Optional cab components such as Heater (99994-1395), Hard Cab Enclosure Side Mirror Set (KAF080-014), Beacon Strobe Light (KAF080-028), Cabin Fan (KAF080-023), Windshield Washer (KAF080-024), Windshield Wiper (KAF080-011), Accessory Fuse Box (99994-1082), Front Accessory Harness (KAF080-043), and Rear Accessory Harness (KAF080-044) are also sold separately
• Windshield Washer (KAF080-024) and Windshield Wiper (KAF080-011) not compatible with KQR Full Windshield, Plastic (KAF080-001) or Flip-Up Polycarbonate Windshield (99994-0753)

Each Hard Cab Enclosure, Front Door Set features automotive style lockable latches, sliding safety glass side windows, and built-in mesh storage compartments for storage of small items

• Front Door Set (KAF080-004) and Rear Door Set (KAF080-005), sold separately
• Hard Cab Enclosure Roof and Frame (99994-1393) required, sold separately

Durable, weatherproof 18 oz. fiber-reinforced PVC laminate material. Installs with durable straps

• Includes fiberglass support rod to shape peak
• Use alone or with Full Windshield (99994-0852) or Flip-Up Windshield (99994-0853). 
• Also available in Realtree Xtra Green.  
• Remove for towing or use an enclosed trailer when transporting a vehicle with a Soft Roof.

Store small tools, important documents and additional items in this durable water-resistant Center Console

• Hinged lid locks into place when closed
• Dual drink holders molded into console
• Covered with a 19mm (3/4") thick foam pad for driver and passenger comfort
• Attaches quickly and easily to the front bench seat in the center passenger position with provided shock cords
• Made of roto-molded HDPE with a textured black finish
• Dimensions: 533mm (21") L x 260mm (10 1/4") W x 203 (8") H

Made from 38mm (1.5 inch) powder-coated steel for extra protection when attached to stock bumper

• Includes headlight guards
• Bumper comes pre-threaded for easy mounting
• Required to mount optional LED Light Bar (99994-1179), sold separately
• Does not interfere with the mounting or use of a winch

Deflect direct wind blasts while maintaining comfortable air-flow throughout cabin with this Half Windshield

• Made from hard coated polycarbonate
• Vehicle must be positioned in the forward facing direction when towed on open trailers

This stylish yet functional accessory adds protection to the rear of your vehicle

• Made of durable 48mm (1 7/8 inch) diameter steel tube
• Powder coated in textured black to provide a uniform look with stock components

Install a horn to alert others of your presence while on the job site or the trail

• Mounts internally
• Includes switch

The Hard Cab Enclosure helps provide in-cabin comfort and occupant protection from the weather

• Can be towed on open trailers in forward facing position
• Twin sheet thermoformed construction for strength and style
• Hard Cab Enclosure required components include Hard Cab Enclosure Roof (KAF080-060/99994-1407), Hard Cab Enclosure Rear Panel (KAF080-061), Hard Cab Enclosure Doors (KAF080-062), choice of windshield KQR Full Glass Windshield (KAF080-041/99994-1392), KQR Full
• Plastic Windshield (KAF080-001), or Flip-Up Polycarbonate Windshield (99994-0753) and Heavy-Duty Spring Set (99994-0514), all sold separately

Deflect direct wind blasts while maintaining comfortable air-flow throughout cabin with the KQR Half Windshield

• KQR mounting system allows for easy installation or removal once installed
• Made from scratch-resistant polycarbonate
• Drilling required for center mount bracket
• Remove for towing or use an enclosed trailer when transporting a vehicle with a KQR Half Windshield installed

The Headrest offers additional occupant comfort

• Made from high-density foam with a molded Kawasaki logo 
• Sold as one individual headrest
• MULE SX No Headrest Bracket required
• Note: MULE PRO-MX models require Headrest Bracket (99994-1190)

This semi-rigid Plastic Roof helps offer passenger protection from harsh weather and sun

• Integrated rear hinge to allow for operation of your tilt bed
• Contoured lightweight design for added style
• Made from semi-rigid black textured plastic
• Can use alone or with Kawasaki Genuine KQR Half Windshield (KAF080-027), KQR Full Windshield - Plastic (KAF080-001), or Flip-Up Windshield, Polycarbonate (99994-0753)
• Original equipment on LE models
• Not compatible with Hard Cab Enclosure accessories

This semi-rigid Plastic Roof helps offer passenger protection from harsh weather and sun

• Contoured lightweight design for added style
• Made from semi-rigid black textured plastic
• Can use alone or with KQR Half Windshield (KAF080-027), KQR Full Windshield, Plastic (KAF080-001), or Flip-Up Polycarbonate Windshield (99994-0753)
• Not compatible with Hard Cab Enclosure (KAF080-060) accessories

This stylish yet functional accessory helps protect the rear of your vehicle from unintended impact while backing-up or loading your cargo bed

• Made of durable 1 7/8 thick steel
• Powder coated in textured black to provide a uniform look with stock components
• Does Not interfere with tail light visibility

Install a horn to alert others of your presence while on the job site or the trail

• Mounts internally
• Includes wire harness and switch

Add sealed storage within your vehicle’s cargo bed

• Ample internal storage space for transporting tools, equipment, straps, tie-downs, emergency kits, trail snacks, etc.
• Material: Molded LDPE black plastic

Vertical shatter-resistant safety glass mirror sits in high-impact plastic housing

• Convex mirror surface doubles the driver’s field or rear view
• Adaptive 360 deg. bracket rotation provides optimal viewing position
• Mirrors attach directly to vehicle ROPS

Add additional functionality to the Rear Cargo/Tyre Rack (99994-1321 / 99994-1321A) with the HMW (High-Molecular Weight) Cargo Rack Tray

• Made from lightweight HMW (High-Molecular Weight) polyethylene
• Rear Cargo/Tire Rack (99994-1321 / 99994-1321A), required, sold separately

600 Denier Sur Last water-resistant material helps provide protection from the elements

• Rear window zips open for increased cabin airflow
• Complete Soft Cab Enclosure requires Roof and Back (99994-0850), Doors (99994-0911) and the choice of two windshields: 
• KQR Flip-Up Windshield (99994-0853) or
• KQR Full Windshield (99994-0852)
• Remove for towing or use an enclosed trailer when transporting a vehicle with a Soft Cab Enclosure, Roof and Back

Installation of the water resistant Soft Cab Enclosure does not impact ease of vehicle transformation

• Doors offered as a set of 4 in black (KAF080-016) in 3 or 6 passenger mode
• Requires KQR Full Windshield, Plastic (KAF080-001) and Soft Cab Enclosure, Soft Door Set, Black (KAF080-016), sold separately, to complete Cab Enclosure system

Vertical shatter-resistant safety glass mirror sits in high-impact plastic housing

• Convex mirror surface increases the driver’s field of view
• Adaptive 360° bracket rotation provides preferred viewing position
• Mirrors attach directly to vehicle ROPS
• Not compatible with Soft Cab Enclosures
• Not compatible with KQR Soft Upper Door Set (99994-1056)

Assists visibility behind the rider

• Useful for towables, skiers, other boat traffic
• Adjust for: Standard View/ RH Bias / LH Bias / Widescreen
• 155° ±5 of horizontal range
• 115° ±5 of vertical range
• Standard equipment on the 2022 Jet Ski Ultra 310 LX watercraft

Not Sold Online
The extended rear deck offers a broader staging platform and more room for stowing gear

• Standard equipment on the 2022 > Jet Ski Ultra 310LX / Ultra 310LX-S watercraft

Lock your helmet conveniently when you’re off the road

• Chassis mounted lock utilises the Kawasaki One Key System, allowing you to use your ignition key
• Steel construction
• All required brackets and hardware included
• Dealer installation required

Convenient storage on handlebars for small lightweight personal items

• Handlebar Bag easily attaches and removes with Velcro and webbing fasteners
• Water-resistant zippers and splash flap
• Handy outside mesh pouch for small items

Perfect fit in JET SKI Ultra 310 Easy-Access Storage compartment

• UV treated water-resistant Ultramax fabric with 'carbon-like' accent
• Water-resistant zipper on lid and carry handle on top
• Side mesh bottle holder pocket with barrel clasp
• Detachable strap for shoulder or back-pack style carry
• Light grey interior and 2 inner pockets for added storage

Vacuum-vented trailering system

Ultra 310LX - Ultra 310LX-S

Ultra 160LX - Ultra 160LX-S

• Zippered openings for access to tie-down cleats
• Constructed of Sur Last solution-dyed polyester
• Water repellent
• Ultra-violet, mildew, and rot-resistant
• Fit Jet Ski Ultra 310X with Ultra Deck (99994-1704) installed, sold separately

Fits in Stern Bag 

• Capacity: Approximately 5 Litres

Vacuum-vented trailering system

• Lower front hull section protects the front of the craft
• Constructed of Sur Last solution dyed polyester

100% waterproof PVC tarpaulin with electronically welded seams

• Watertight roll-top closure with self-fastening and quick release straps
• Four G-Hook web-loop straps for universal attachment
• Reflective accent for better visibility
• Dimensions: 13.5" L x 6.5" Dia
• Capacity: Approximately 7 Litres

Rear Cargo Rack conveniently mounts to Multi-Mount Rail on the Jet Ski Ultra 310LX or Jet Ski Ultra 310X with Ultra Deck (99994-1704), required, sold separately

• Adjustable rail positions
• Large capacity
• RotopaX enabled
• Fishing pole provisions
• Holds three Dry Duffel Bags (99994-1723), sold separately

Bluetooth and Aux

• Jog-dial control
• 200 watt
• Standard equipment on the 2022 Jet Ski Ultra 310 LX watercraft

Stylish Meter Visor helps deflect wind and spray

• Standard equipment on the 2022 Jet Ski Ultra 310LX watercraft
• Standard equipment on the 2023 Jet Ski Ultra 160LX watercraft