Windscreens

Freight charge not included in the price shown, contact your dealer. The KQR Full Glass Windshield can be quickly installed or removed with minimal use of tools once installed

• Tool-less removal when used as standalone windshield - a wrench is required for removal when used as a component of the Hard Cab Enclosure
• Helps provide protection from wind and debris for improved in-cabin comfort
• Made from DOT approved AS1 safety glass
• Vehicle must be positioned in the forward facing direction when towed on open trailers

Whether on the job site or the farm, a Back-Up Beeper is a useful addition to alert others that your vehicle is reversing

• Emits 97db
• Product meets O.S.H.A. regulations and SAE standard J994
• Black with steel housing
• Wires directly to the reverse switch on the transmission

Installation Instructions & Info

This high quality full-width windshield is made from durable polycarbonate and provides excellent protection from wind and dust

• The flexible center portion allows easy access to front storage compartment
• Easy installation and removal with included hardware
• Can be used alone, with a roof, or as a component of the Soft Cab Enclosure (KAF600-035B)

Remove for towing or use an enclosed trailer when transporting a vehicle with a Fixed Windshield installed at speeds greater than 40 kph

Helps provide protection from mud, sand and debris.

• Fixed one-piece design features a hard-coated scratch resistance surface.
• Fits with all Kawasaki Genuine Accessory tops and mirrors.
• Must be removed for tansport on open trailer at speeds in excess of 80 kph.

The Half Windshield deflects airflow for a more comfortable ride at higher speeds

• One-piece design features a hard-coated scratch-resistant surface

Installation Instructions & Info

Helps provide protection from mud, sand and debris

• Fixed one-piece design features a hard-coated scratch resistant surface
• Fits with all Kawasaki Genuine Accessory tops and mirrors

Remove for towing or use an enclosed trailer when transporting a vehicle with a Full Windshield

Freight charge not included in the price shown, contact your dealer.

Three-position Flip-Up Polycarbonate Windshield provides the option for a sealed windshield with the ability to flip up to let just the right amount of air into the cabin

• Closed and vented positions allow occupants to limit air flow when driving while the fully open position provides maximum airflow while stopped
• Made from 4.5mm (0.177 inch) scratch-resistant polycarbonate (hard coated)
• Installation requires no drilling

Towable in forward facing postion only. Flip-Up Polycarbonate Windshield must be in the closed and locked position.

Installation Instructions & Info

Add sealed storage within your vehicle’s cargo bed

• Up to four KQR Cargo Boxes can quickly attach to either cargo bed rail without tools once assembled
• Ample internal storage space for transporting tools, equipment, straps, tie-downs, emergency kits, trail snacks, etc…
• KQR Cargo Box measures 686mm (27 inch) L x 381mm (15 inch) W x 381mm (15 inch) H
• Molded LDPE black plastic
• Requires two KQR Accessories Mounts (KAF080-012) sold separately

Installation Instructions & Info

Whether on the job site or the farm, a Back-Up Beeper is a useful addition to alert others that your vehicle is reversing

• Black with steel housing
• Wires directly to the reverse switch on the transmission

Installation Instructions & Info

Extend your usable cargo space by 20cm (8 inches) approx, with this durable black powder coated steel Bed Extender/Divider

• Simply lower the tailgate and attach the extender to the bed rails with two KQR clamps
• Easily adjust to different cargo sizes by sliding the clamps forward or backward or by reversing the entire Bed Extender to create a divider
• Two KQR Accessory Mounts Required (KAF080-012) required (sold separately)

Installation Instructions & Info

The KQR Full Windshield, Glass can be quickly installed and removed without tools

• Automotive-style frameless, three dimensional, curved design
• Helps provide protection from wind and debris for improved in-cabin comfort
• Made from DOT approved AS1 safety glass
• Printed gradient border, TERYX KRX 1000 side x side silhouette, and Kawasaki Logo add to the custom look of this windshield
• Can be used with any combination of soft doors, rear panels, and roofs offered by Kawasaki Not compatible with Soft Roof (99994-1296)
• Compatible with Windshield Wiper/Washer Kit (99994-1295)
• Vehicle must be positioned in the forward-facing direction when towed on open trailers

Order On Demand
Installation Instructions & Info
Installation Video

The Flip-Down Windshield, Polycarbonate can be quickly opened or closed when desired

• Helps provide protection from the wind for improved in-cabin comfort when closed or increased cabin ventilation when open
• Features a screen printed, three-piece design with a tinted top piece for added glare resistance
• Made from scratch-resistant hard-coated polycarbonate
• Not compatible with Windshield Wiper/Washer (99994-1295) or Soft Roof (99994-1296)
• Towable in forward-facing position only
• Flip-Down Polycarbonate Windshield must be in the closed and locked position while being towed
• Vehicle speed must be kept below 88klm when in flip-down position

Order On Demand
Installation Instructions & Info
Installation Video

The KQR Half Windshield deflects direct wind blasts while maintaining comfortable air-flow throughout

• Made from hard coated polycarbonate
• 3D formed and screen printed for a custom look and fit
• Not compatible once a Windshield Wiper/Washer Kit 99994-1295 has been installed
• Vehicle must be positioned in the forward facing direction when towed on open trailers

Installation Instructions & Info
Installation Video

600 Denier Sur Last water-resistant material easily attaches to vehicle with quick-release buckles and hook-and-loop straps

• Creates a full enclosure when combined with the KQR Full Windshield, Polycarbonate (99994-1289), Soft Rear Panel (99994-1297) or  KQR Rear Panel, Polycarbonate (99994-1294), and Soft Upper Door Set (99994-1298)
• Soft Roof (99994-1296) does not require Soft Upper Door Set (99994-1298) but should be used in combination with a KQR Full Windshield, Polycarbonate (99994-1289) and Soft Rear Panel (99994-1297) or  KQR Rear Panel, Polycarbonate (99994-1294)
• Not compatible with KQR Full Windshield, Glass (99994-1290), Flip-Down Windshield, Polycarbonate (99994-1291), or Rear LED K-Glow Light Bar Installation (99994-1323)
• Towable on open trailers when used in combination with KQR Full Windshield, Polycarbonate (99994-1289), Soft Rear Panel (99994-1297) or  KQR Rear Panel, Polycarbonate (99994-1294), and the Soft Upper Door Set (99994-1298). The vehicle must be positioned in the forward-facing direction when towing.

Order On Demand
Installation Instructions & Info
Installation Video

Freight charge not included in the price shown, contact your dealer. The KQR Half Windshield deflects direct wind blasts while maintaining comfortable air-flow throughout

• 3D Formed for a custom look and fit
• Quantum hard-coated polycarbonate
• 30x More Scratch Resistant than Acrylic
• 10x More Scratch Resistant than FMR Coated Polycarbonate
• The Quantum hard-coating help provide higher optical definition and clarity
• Vehicle must be positioned in the forward-facing direction when towed on open trailers

Installation Instructions & Info

Polycarbonate material helps provide protection from the elements

• KQR Rear Panel, Polycarbonate can be installed or removed without tools
  Can be used with any combination of windshield, doors, and roofs offered by Kawasaki for the MULE PRO-MX side x side
• Complete Cab Enclosure requires Plastic Roof, Soft Cab Enclosure Upper Door Set, Black (99994-1161), KQR Rear Panel, Polycarbonate (99994-1156) and KQR Full Windshield, Glass (99994-1155) ,KQR Fixed Polycarbonate Windshield (99994-1154)

Vehicle must be positioned in the forward facing direction when towed on open trailers with a full cab

Quantum hard-coated polycarbonate material helps provide protection from the elements

• Three-dimensionally formed, lightweight design with screened logos for added function and style
• Add a KQR Sport Roof  (99994-1293), Soft Roof (99994-1296), Soft  Upper Door Set (99994-1298), and choice of windshield KQR Full Windshield, Glass (99994-1290) or KQR Full Windshield, Polycarbonate (99994-1289) to create a complete Cab Enclosure

Order On Demand
Installation Instructions & Info
Installation Video

The Hard Cab Enclosure, Roof and Frame helps provide in-cabin comfort and occupant protection from the weather

• Constructed of black double wall TPO plastic with steel framework
• Installation of the Hard Cab Enclosure does not impact ease of vehicle transformation
• Roof tilts on gas shocks for easy access to engine
• Each door features lockable latches, sliding safety glass side windows, and built-in mesh storage compartments for storage of small items
• Front Doors and Rear Doors are sold separately in sets of two
• Clear sliding window partition between front and rear seats to allow for complete cab enclosure whether in 3 or 6 passenger mode
• Can be towed on open trailers

Hard Cab Enclosure required components include Hard Cab Enclosure Roof and Frame (99994-1393), Front Door Set (KAF080-004), Rear Doors Set (KAF080-005), choice of windshield KQR Full Windshield, Glass (99994-1392), KQR Full Windshield, Plastic (KAF080-001), or Flip-Up Polycarbonate Windshield (99994-0753) and Heavy-Duty Spring Set (99994-0514), all sold separately

• Optional cab components such as Heater (99994-1395), Hard Cab Enclosure Side Mirror Set (KAF080-014), Beacon Strobe Light (KAF080-028), Cabin Fan (KAF080-023), Windshield Washer (KAF080-024), Windshield Wiper (KAF080-011), Accessory Fuse Box (99994-1082), Front Accessory Harness (KAF080-043), and Rear Accessory Harness (KAF080-044) are also sold separately
• Windshield Washer (KAF080-024) and Windshield Wiper (KAF080-011) not compatible with KQR Full Windshield, Plastic (KAF080-001) or Flip-Up Polycarbonate Windshield (99994-0753)

Order On Demand
Installation Instructions & Info

Each Hard Cab Enclosure, Front Door Set features automotive style lockable latches, sliding safety glass side windows, and built-in mesh storage compartments for storage of small items

• Front Door Set (KAF080-004) and Rear Door Set (KAF080-005), sold separately
• Hard Cab Enclosure Roof and Frame (99994-1393) required, sold separately

On Demand Order Only

Installation Instructions & Info

Durable, weatherproof 18 oz. fiber-reinforced PVC laminate material. Installs with durable straps

• Includes fiberglass support rod to shape peak
• Use alone or with Full Windshield (99994-0852) or Flip-Up Windshield (99994-0853). 
• Also available in Realtree Xtra Green.  
• Remove for towing or use an enclosed trailer when transporting a vehicle with a Soft Roof.

Installation Instructions & Info