Seats & Backrests

Give your passenger additional comfort with this classic style Passenger Grab Bar

• Made from durable chrome-plated steel
• Includes all required hardware
• Not compatible with the Side Grip Set (99994-1014)

Large storage bin fits under passenger side of seat. Lift seat bottom for access.

• Approximately 13 litres volume.

Convenient storage for touring and daily use

• Saddlebag Set and Soft Top Case feature a unique rubberized vinyl finish that is water-resistant
• Tank Bag manufactured from ballistic nylon
• Order Soft Top Case, Saddlebags, and Tank Bag separately
• Saddlebag Set dimensions: 406mm (16”) L x 279mm (11”) W x 178mm (7”) H

Conveniently lock your helmet when you’re off the bike.

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for operation
• Steel construction
• Dealer installation required

Mount this luggage rack to your rear fender for extra cargo capacity

• Developed by Kawasaki to integrate with the clean, modern lines of your Vulcan S motorcycle
• Powder coated steel
• All required brackets and hardware included
• Not compatible with accessory passenger seats
• 356mm (14”) L x 190mm (71/2”) W
• Maximum Load 2.2kg.

Charge your portable devices on the go with this 12-volt DC Power Outlet

• Installs into dash panel
• Dealer installation recommended
• Requires Relay Kit (99994-1004), sold separately

Made from durable chrome-plated steel

• Includes all required hardware
• Helps maneuver the Z900 RS motorcycle when not in use
• Not intended for passenger use while riding
• Not compatible with the Passenger Grab Bar (99994-1013)

Made to tailor fit and complement the Ninja 400 and Z400 motorcycles, this seat enhances riding comfort for taller riders

• The ERGO-FIT extended reach seat is 25mm taller than stock and comes fully assembled
• Utilizes factory seat base and components for a factory fit
• PVC foam with vinyl cover

Charge your portable devices on the go with this 12-volt DC Power Outlet

• Installs directly into knock-out port on the dash panel
• Standard equipment on Ninja H2 SX SE
• Dealer installation recommended

Taller Meter Cover for the Z400 raises airflow from the front cowl while maintaining an overall aggressive appearance

• Manufactured from slightly translucent black high density ABS plastic
• 51mm (2”) wider and 102mm (4”) higher than stock meter cover
• Includes required brackets, hardware, and installation instructions

The ERGO-FIT reduced reach seat reduces the seat height by 15mm (5/8")

• Made to fit and complement the Ninja H2 SX motorcycle
• PVC foam with vinyl cover
• Includes all necessary hardware

Prevent tip-over damage to your front axle, axle nut, fork bottoms and brake calipers

• Manufactured from high density ABS plastic
• Functional yet stylish and compact design
• Includes required brackets, hardware and installation instructions
• Note: Front Axle Sliders help protect your motorcycle but will not prevent all types of damage

Help protect your engine shrouds from tip-over damage

• High-density black ABS plastic Frame Sliders are mounted with factory-designed metal brackets
• Includes required brackets, hardware and installation instructions
• Note: Frame Sliders help protect your motorcycle but will not prevent all types of damage

Secure your personal items in 21 litres of lockable storage

• Rugged styling to complement the aggressive design of your Kawasaki vehicle
• Utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Individual side case dimensions: 467mm (18.4”) L x 238mm (9.4”) W x 351mm (13.8”) H with 21 litre storage capacity
• 21 Litre Side Cases clip to sturdy support brackets
• Requires Fitting Kit (99994-1492), Side Panel Set (99994-1491-GU), and One Key System (99994-1566)
• Silver resin Side Panel Set provides colour accents and contributes to functional adventure-style looks

• 21 Liter Side Cases, Side Panel Set (99994-1491-GU)
• 21 Liter Side Cases, Fitting Kit (99994-1492)
• 21 Liter Side Cases, One Key System (99994-1566)

Help protect your tank’s paint finish from scratches and ordinary wear and tear

• Made with textured non-slip vinyl

Made from durable black steel

• Includes all required hardware
• Not intended for passenger use while riding
• Not compatible with the Passenger Grab Bar (99994-1545)

ERGO-FIT Reduced Reach Seat reduces the seat height by 25mm (1") and has a narrowed front

• The seat vinyl is the same high-elasticity-type material used on the standard seat
• Made to fit and complement the W800 motorcycle
• Includes all necessary mounting hardware

ERGO-FIT reduced reach seat reduces the seat height by 20mm (4/5") and has a narrowed front

• The seat area has deeper cushioning for added long distance comfort
• Made to fit and complement the Versys 1000 SE
• Includes all necessary hardware

ERGO-FIT reduced reach seat reduces the seat height by 25mm (1") and has a narrowed front

• The seat vinyl is the same cold-resistant, high-elasticity-type material used on the standard seats
• Made to fit and complement the Z900 RS motorcycle
• Includes all necessary hardware

Lock your helmet securely and conveniently when you’re off the road

• Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key for unlocking
• Steel construction
• All required brackets and hardware included
• Authorized Kawasaki dealer installation required

Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip

• Adjust to low, medium, or high settings with the touch of a button
• Indicator light on the left grip improves setting visibility
• Grip Heater Set with all required wiring, brackets, and hardware
• Dealer installation recommended

Black painted steel construction luggage rack mounts to the rear frame

• Designed by Kawasaki to enhance your W800 motorcycle styling while providing extra space for whatever you take with you on the road
• All required brackets and hardware included
• Not compatible with Passenger Grab Bar (99994-1223)

Chrome plated steel construction luggage rack mounts to the rear frame

• Designed by Kawasaki to enhance your W800 motorcycle styling while providing extra space for whatever you take with you on the road
• All required brackets and hardware included
• Not compatible with Passenger Grab Bar (99994-1223)

Scratch-resistant clear windscreen, designed to provide additional rider comfort.

• Kawasaki branded product, produced and developed by Kawasaki and fully road legal.

Chrome rectangular steel bar construction

• Measures: 191mm (7½”) L x 178mm (7”) W
• Cargo capacity 2.2 kg (5 lbs.)
• Passenger Backrest (K99994-0066A) required for 900 Classic models, sold separately

Designed to match your Vulcan 900 Custom motorcycle chevron styling

• Padded mini-backrest is 203mm (8) H from seat surface
• Mounts easily with supplied hardware
• Designed to mount the Luggage Rack (K53020-378 or K53020-378B), sold separately

Designed to match your Vulcan® 900 Custom motorcycle chevron styling

• Padded mini-backrest is 203mm (8”) H from seat surface
• Mounts easily with supplied hardware
• Designed to mount the Luggage Rack (K53020-378 or K53020-378B), sold separately

Chrome-plated tubular steel design to match your VN900 Custom chevron styling

• Rack measures 9" wide x 8" long
• Mounts easily with supplied hardware
• Cargo weight limit 2.2kg 
• K53020-377 backrest required (sold separately)

Designed to match your Vulcan 900 Custom motorcycle chevron styling

• Rack measures 229mm (9”) W x 203mm (8”) L
• Mounts easily with supplied hardware
• Cargo weight limit 2.2kg (5 lbs.)
• Backrest (K53020-377B) required, sold separately

Clear touring screen made with optically correct polycarbonate plastic for improved visibility and Quantum hard coating to protect against scratching

• KQR mounting system allows for easy installation or removal once installed
• 435 mm (17 1/4 inch) tall
• Note: Requires KQR Mounting Bracket Kit (99994-0526B) and KQR Fork Bracket Kit (99994-0546) sold separately
• Note: 2016 Vulcan S Cafe Edition does not require 99994-0546 (already installed on unit)

Chrome steel construction Luggage Rack mounts to your Passenger Backrest

• Designed by Kawasaki to enhance your Vulcan S styling while providing extra space for whatever you take with you on the road
• 20.3cm long X 22.8cm wide (8” long x 9” wide)
• NOTE: Requires KQR Passenger Backrest (99994-0518) and KQR Bracket Kit (99994-0523) (sold separately)

Made to tailor fit and complement the Ninja 650 motorcycle, this seat enhances riding comfort for taller riders

• The ERGO-FIT extended reach seat is 25mm (1 inch) taller than stock and comes fully assembled
• Utilizes factory seat base and components for a factory fit
• PVC foam with vinyl cover
• Includes all parts needed to replace the stock seat
• Stylish carbon fiber pattern trim and embroidered Kawasaki logo

ERGO-FIT reduced reach seat reduces the seat height 35mm (1 3/8") and has a narrowed front, facilitating the reach to the ground for increased confidence and comfort

• The seat leather is the same cold-resistant, high-elasticity-type material used on the standard seats
• Made to fit and complement the KLR650 motorcycle
• Includes all necessary hardware
• Utilizes factory seat base
• Fits 2022~ KLR650 & KLR650 Adventure